Inconel 601 Fasteners suppliers

Inconel 601 Fasteners suppliers

ASTM B166 UNS N06601 Inconel 601 Bolts and Nuts suppliers in Mumbai, India

Cheap 2.4851 Bolt, Inconel 601 Screws & Alloy 601 Washer at Factory price in India

Inconel 601 Fasteners suppliers
Inconel 601 Fasteners suppliers
Inconel 601 Bolts
Inconel 601 Bolts
Inconel 601 Screws
Inconel 601 Screws

Inconel 601 Fasteners many much in demand properties and these include a high mechanical strength, resistance to aqueous corrosion, readily formed, easily welded and it is also easily machined. Inconel 601 is also known as Nicrimphy 601, Nicrofer 6023, Pyromet 601 and Incoloy 601. A very outstanding feature of Inconel 601 Bolt is that it is resistant to high temperature oxidation. Inconel 601 Bolts and Nuts is a Nickel-Chromium alloy, to which aluminium has been added. Because of the addition of aluminium, Inconel 601 Bolt has a very high resistance to oxidation. Inconel 601 has a density of 0.293 lb/in³ (8.11g/cm³). Its Coefficient of Expansion is 7.6 x 10-6 in/in °F (70 – 212°F) or 13.75 μm/m °C (20 – 100°C). Its Melting Point is 2571°F (1411°C). The Modulus of Elasticity of Inconel 601 is 29951 ksi (206.5 kN/mm²).

At elevated temperatures, ASTM B166 601 Inconel Bolt retains much of its strength and at room temperature it has high tensile properties. It has a Modulus of Rigidity of 11777 ksi (81.2 kN/mm²). Because of the nickel base in Inconel 601 Screws, along with a good amount of chromium, it has the capacity to give very good resistance to a number of highly corrosive media. Inconel 601 Nut has many applications such as its use in air preheaters, annealing tubes, gas turbine components, carburizing, jet-engine igniters, vehicular applications, nitriding, catalyst regenerators, carbonitriding, combustor components, annealing, petrochemical processing, heat treating equipment, catalyst grid supports, diffuser assembles, combustion-can liners and industrial furnaces. Alloy 601 Fasteners are accepted as the standard construction material for different kinds of thermal-processing equipment.

We manufacture bolts, nuts, anti-theft bolts & nuts, studs, foundation bolts, U-bolts, plain and spring washers in Inconel 601 material in India. Inconel 601 Socket Head Cap Screws are most popular fastener & can come with large cylindrical heads that have recessed hex-shaped drives. Due to this quality these Inconel 601 Screws are mainly in demand by the applications where clearance is limited, and sockets and wrenches can't be used. The size of a Inconel 601 metric screws or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). The size of Inconel 601 nuts, will appear as diameter and pitch.

Get suitable Inconel 601 Fasteners suppliers in Abu Dhabi, Bahrain, Singapore, Dubai, UK, Australia and South Africa.

Save up to 40% on Alloy 601 Fasteners. Visit Inconel 601 Bolts manufacturers factory in India, ask for Alloy 601 Bolts free sample.

Inconel 601 Fasteners Price

M8~M72 Inconel 601 alloy steel bolt price per piece US $0.20-$2.00 / Piece
UNS N06601 Inconel 601 2.4851 Inconel 601 Big NUT Heavy hex Nut US $14.80-$15.60 / Pieces

Inconel 601 hex bolt and nut

US $0.01-$0.50 / Piece
INCONEL 601 / 2.4851/ N06601 HEX CAP SCREW / BOLT US $0.10-$100.00 / Piece

Din975 M8 Inconel 601 bolt price per piece

US $0.50-$2.00 / Piece
Inconel 601 price stud bolts with hex nut US $0.01-$2.00 / Piece
Inconel 601 cotter pin bolt manufacturer US $0.10-$5.00 / Piece
Din975 M8 Inconel Alloy 601 bolt price per piece US $0.50-$2.00 / Piece
Inconel 601 UNS N06601 2.4851 Inconel 601 stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Cheap inconel 601 hex bolt and nut US $0.04-$0.60 / Piece
M8 Inconel 601 bolt price per piece US $0.50-$2.00 / Piece
Inconel 601 UNS N06601 2.4851 Inconel 601 12 Point Flange Bolt US $3.20-$3.60 / Pieces
China supplier best price Iso 4017 Inconel 601 Hex Bolt And Nut US $0.05-$1.00 / Piece
Inconel 601 UNS N06601 DIN/EN 2.4851 12 point bolt flange shoulder bolt U bolt eye bolt US $10.50-$12.00 / Pieces
INCONEL 601 / 2.4851 / UNS N06601 hex nut 3/8-16 5/16-18 US $0.20-$0.50 / Pieces

Please note this is an approx Cost of Alloy 601 Fasteners in India. For final Inconel 601 Screws price list please mail us.

Inconel 601 Fasteners applications

Inconel 601 Fasteners suppliers

Inconel 601 Nuts and Bolts
Inconel 601 Nuts and Bolts
Inconel Alloy 601 Bolts and Nuts
Inconel Alloy 601 Bolts and Nuts
Inconel 601 Exhaust Bolts
Inconel 601 Exhaust Bolts
Inconel 601 Hex Bolts
Inconel 601 Hex Bolts
Inconel 601 Stud Bolts
Inconel 601 Stud Bolts
Inconel 601 M10 Bolts
Inconel 601 M10 Bolts
Alloy 601 U Bolts
Alloy 601 U Bolts
Inconel 601 Lag Bolts
Inconel 601 Lag Bolts
Inconel 601 Anchor Bolt
Inconel 601 Anchor Bolt
Inconel Alloy 601 Square U Bolts
Inconel Alloy 601 Square U Bolts
Alloy 601 Carriage Bolts
Alloy 601 Carriage Bolts
Alloy 601 Countersunk Bolts
Alloy 601 Countersunk Bolts
Inconel 601 Socket Head Cap Screws
Inconel 601 Socket Head Cap Screws
Alloy 601 Set Screws
Alloy 601 Set Screws
Inconel 601 Cap Screws
Inconel 601 Cap Screws
Inconel 601 Hex Cap Screws
Inconel 601 Hex Cap Screws
Inconel Alloy 601 Flat Head Screws
Inconel Alloy 601 Flat Head Screws
Alloy 601 Machine Screws
Alloy 601 Machine Screws
Inconel 601 Self Tapping Screws
Inconel 601 Self Tapping Screws
Alloy 601 Self Drilling Screw
Alloy 601 Self Drilling Screw
Inconel 601 Washers
Inconel 601 Washers
Inconel 601 Flat Washers
Inconel 601 Flat Washers
Alloy 601 Belleville Washers
Alloy 601 Belleville Washers
Alloy 601 Spring Washers
Alloy 601 Spring Washers
Alloy 601 Nord Lock Washers
Alloy 601 Nord Lock Washers
Inconel 601 Hex Nuts
Inconel 601 Hex Nuts
Alloy 601 Barrel Nuts
Alloy 601 Barrel Nuts
Alloy 601 Wheel Nuts
Alloy 601 Wheel Nuts
Inconel 601 Threaded Rod
Inconel 601 Threaded Rod
Alloy 601 Threaded Inserts
Alloy 601 Threaded Inserts
Inconel 601 Threaded Stud
Inconel 601 Threaded Stud
Double End Threaded Rod
Double End Threaded Rod
Inconel 601 Dowel Pins
Inconel 601 Dowel Pins
Alloy 601 Spring Pin
Alloy 601 Spring Pin
Inconel 601 Studs
Inconel 601 Studs
Inconel 601 Exhaust Studs
Inconel 601 Exhaust Studs
Inconel 601 Nuts and Washers
Inconel 601 Nuts and Washers
Alloy 601 Rings
Alloy 601 Rings
Inconel 601 Springs
Inconel 601 Springs
Alloy 601 Hex Head Bolts
Alloy 601 Hex Head Bolts

Alloy 601 Fasteners Specification

Inconel 601 Fasteners Material Specification ASTM B 166 ASME SB 166, UNS 6601 Bolts
Standard DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards
Inconel 601 Fasteners/ Bolts Size M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
Length 3 mm to 200 mm
Inconel 601 Bolts, Studs Threads: METRIC, BSW, BSF, UNC, UNF or as required
Alloy 601 Fasteners Standard:

ANSI - American National Standards Institute

  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Alloy 601 Stud Bolt length are defined in ASME B16.5 standard
  • Alloy 601 Hex nuts are defined in ASME B18.2.2
  • ASME B18.5

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS - Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO - International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

Source of raw materials Tata Steel, JSPL, RINL, Usha Martin, Dhamm Steel, Mukund Steel etc.
SCOPE OF MANUFACTURE
  • Hot Forged Inconel 601 Fasteners, Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Inconel 601 Fasteners, Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Inconel 601 Fasteners In Form of:

Hex, Square, Round, Threading as per Gauge Etc.

Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Inconel 601 bolting Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Inconel 601 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Inconel 601 bolting materials Surface Coating:
  • Teflon Coated Fasteners
  • Phosphate Coated Fasteners
  • Zinc Coated Fasteners
  • Ptfe Coated Inconel 601 Fasteners
  • Xylon Coated Fasteners
  • Cadmium Coated Fasteners
  • Hot Dipped Galvanizing Coated Fasteners

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Popular Types of Alloy 601 Bolts Inconel 601 Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc.
Popular Types of Alloy 601 Nut Inconel 601 Hex Head Nut, Eye Nut, Dome Nut, Wing Nut, T Nut, Panel Nut, Lock Nut, Coupling Nut, Square Nut, Acorn Nut etc.
Popular Types of Alloy 601 Screw Inconel 601 Hex Head Cap Screws, Socket Set Screws, Anchor Screws, Blind Rivet, Socket Head Screws, Concrete Screws, Shoulder Screws, Panel Screws, Threaded Screws, Machine Screws etc.
Popular Types of Alloy 601 Washer Inconel 601 Machine Washers, Flat Washer, Star Washers, Sealing Washer, Lock Washer, Split Washer etc.
Our stockyad location for fast delivery in India Agra, Bhubaneswar, Chennai, Dhanbad, Shivamogga, Noida, Thane, Coimbatore, Hyderabad, Ahmedabad, Nashik, Tirunelveli, Pimpri-Chinchwad, Nagpur, Thiruvananthapuram, Tiruchirappalli, Bengaluru, Mumbai, Vasai, Pune, Navi Mumbai
Inconel 601 Fasteners Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

Inconel 601 Fasteners Sizes

Inconel 601 Screws Type SIZE GRADE ASME ISO ASTM
Inconel 601 Socket Head Cap Screws M1.6 to M64 12.9 B18.3.1 M 4762 A574M
Inconel 601 Socket Low Head Cap Screws M4 to M20 10.9
Inconel 601 Socket Head Shoulder Screws M6 to M24 012.9 B18.3.3M
Inconel 601 Countersunk Socket Head Screws M3 to M20 012.9 B18.3.5M 10642 F835M
Inconel 601 Button Head Socket Screws M3 to M12 012.9 B18.3.4M 7380 F835M
Inconel 601 Flange Button Head Socket Screws M3 to M10 012.9 F835M
Inconel 601 Knurled Point Socket Set Screws M3 to M20 45H B18.3.6M 4029 F912M
Inconel 601 Flat Point Socket Set Screws M6 to M12 45H B18.3.6M 4026 F912M
Inconel 601 Dog Point Socket Set Screws M3 to M20 45H B18.3.6M 4028 F912M
Inconel 601 Cone Point Socket Set Screws M3 to M12 45H B18.3.6M 4027 F912M
Inconel 601 Plain Point Socket Set Screws M3 to M20 45H B18.3.6M 4029 F912M
Inconel 601 Taper Pressure Plug M8 to M22 -

Inconel 601 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Inconel 601 Hex Head Bolt / Screws M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

Inconel 601 Nuts Type SIZE PROPERTY CLASS STANDARD
Inconel 601 Hex Nut M6 to M42 10 ISO 4032
Inconel 601 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
Inconel 601 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
Inconel 601 Hex Weld Nut M6 to M12 8 DIN 929

Inconel 601 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, Inconel 601 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, Inconel 601 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, Inconel 601 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, Inconel 601 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Below table compares various metric sizes to the closest inch equivalent

Metric Closest Inch
M1.4-0.3 0-80 (Larger)
M2-0.4 1-64 (Smaller)
M2.5-0.45 3-56 (Larger)
M3-0.5 4-48 (Smaller)
M3.5-0.6 6-40 (Same)
M4-0.7 8-36 (Larger)
M5-0.8 10-32 (Smaller)
M6-1.0 1/4-28 (Larger)
M7-1.0 1/4-28 (Smaller)
M8-1.25 5/16-18 (Smaller)
M10-1.5 3/8-16 (Smaller)
M12-1.75 1/2-13 (Larger)
M14-2.0 9/16-12 (Larger)
M16-2.0 5/8-11 (Smaller)
M18-2.5 3/4-10 (Larger)
M20-2.5 3/4-10 (Smaller)
M22-2.5 7/8-9 (Larger)
M24-3.0 1-8 (Larger)
M30-3.5 1 1/8-7 (Smaller)
M36-4.0 1 3/8-6 (Smaller)

DIN and ISO designations

No. Description
DIN 84 Slotted Cheese Head Machine Screws
DIN 85 Slotted Pan Head Machine Screws
DIN 94 Cotter Pin
DIN 125A Flat Washer (without Chamfer)
DIN 125B Flat Washer (with Chamfer)
DIN 127B Split Lock Washer
DIN 137B Spring Wave Washer
DIN 315 Wing Nut
DIN 439B Machine Screws Hex Nut, Finished Hex Jam Nut
DIN 911 Long Arm Hex Key
DIN 912 Hex Socket Head Cap Screws
DIN 916 Hex Socket Set Screws
DIN 931 Hex Head Cap Screws Partially Threaded
DIN 933 Hex Head Cap Screws Fully Threaded
DIN 934 Finished Hex Nut
DIN 939 Double End Stud
DIN 960 Hex Head Cap Screws Partially Threaded
DIN 961 Hex Head Cap Screws Fully Threaded
DIN 963 Slotted Flat Head Machine Screws
DIN 964 Slotted Oval Head Machine Screws
DIN 965 Phillips Flat Head Machine Screws
DIN 966 Phillips Oval Head Machine Screws
DIN 975 Threaded Rod
DIN 980V Hex Steel Prevailing Torque Lock Nut
DIN 985 Hex Nylon Insert Lock Nut
DIN 6334 Rod Coupling Nut
DIN 6797A External Tooth Lock Washer
DIN 6797J Internal Tooth Lock Washer
DIN 6912 Hex Low Socket Head Cap Screws
DIN 6921 Hex Flange Head Screws
DIN 6923 Hex Flange Nut
ISO 7379 Hex Socket Head Shoulder Screws
ISO 7380 Hex Button Socket Head Cap Screws
DIN 7985 Phillips Pan Head Machine Screws
DIN 7991 Hex Flat Socket Head Cap Screws

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Prestige quality Inconel 601 Fasteners suppliers in India offer these Alloy 601 Bolts in DIN, ISO, JIS or ANSI standard.

Alloy 601 Fasteners Stock

Siddhagiri Metals is a full service Inconel 601 Bolts and Nuts manufacturer & distributor in India

Siddhagiri is a manufacturer and supplier of Inconel 601 Fasteners offering more than 6500 varieties in all types of Inconel 601 fasteners in all sizes, built a distribution network with more then 65 countries globally.

Inconel 601 Hex Head Bolts Alloy 601 Hex Head Bolts
601 Alloy Hex Head Bolts 601 Inconel Hex Head Bolts
UNS N06601 Hex Head Bolts WERKSTOFF NR. 2.4851 Hex Head Bolts
ASTM B166 Inconel 601 Hex Head Bolts Inconel 601 Square Bolts
Alloy 601 Square Bolts UNS N06601 Square Bolts
ASTM B166 601 Inconel Square Bolts Inconel 601 U Bolts
Alloy 601 U Bolts ASTM B166 601 Inconel U Bolts
Inconel 601 Eye Bolts UNS N06601 Inconel Nuts Bolts
WERKSTOFF NR. 2.4851 Eye Bolts ASTM B166 601 Inconel Eye Bolts
Inconel 601 T Bolts Alloy 601 T Bolts
WERKSTOFF NR. 2.4851 T Bolts ASTM B166 601 Inconel Nuts and Bolts
Inconel 601 Hex Bolts Alloy 601 Hex Bolts
601 Alloy Hex Bolts 601 Inconel Hex Bolts
WERKSTOFF NR. 2.4851 Hex Bolts ASTM B166 601 Inconel Hex Bolts
Inconel 601 Lag Bolts Alloy 601 Lag Bolts
ASTM B166 601 Inconel Lag Bolts Inconel 601 Counter sunk Bolts
Alloy 601 Counter sunk Bolts UNS N06601 Counter sunk Bolts
WERKSTOFF NR. 2.4851 Counter sunk Bolts ASTM B166 601 Inconel Nuts and Bolts
Inconel 601 Hex Head Nut Alloy 601 Hex Head Nut
UNS N06601 Hex Head Nut WERKSTOFF NR. 2.4851 Hex Head Nut
Inconel 601 Square Nut Alloy 601 Nut Bolt
UNS N06601 Square Nut WERKSTOFF NR. 2.4851 Square Nut
Inconel 601 Lock Nut Alloy 601 Lock Nut
601 Alloy Lock Nut 601 Inconel Lock Nut
UNS N06601 Lock Nut WERKSTOFF NR. 2.4851 Lock Nut
ASTM B166 601 Inconel Lock Nut Inconel 601 Eye Nut
Alloy 601 Eye Nut UNS N06601 Eye Nut
WERKSTOFF NR. 2.4851 Eye Nut Inconel 601 wing Nut
Alloy 601 wing Nut UNS N06601 wing Nut
WERKSTOFF NR. 2.4851 wing Nut Inconel 601 T Nut
Alloy 601 T Nut UNS N06601 Rings
WERKSTOFF NR. 2.4851 Nut Bolt ASTM B166 601 Inconel Springs
Inconel 601 Panel Nut Alloy 601 Panel Nut
UNS N06601 Panel Nut WERKSTOFF NR. 2.4851 Panel Nut
ASTM B166 601 Inconel Panel Nut Inconel 601 Coupling Nut
Alloy 601 Coupling Nut UNS N06601 Inconel 601 Nuts and Bolts
WERKSTOFF NR. 2.4851 Threaded Rod ASTM B166 Inconel 601 Coupling Nut
Inconel 601 Dome Nut Alloy 601 Dome Nut
UNS N06601 Dome Nut WERKSTOFF NR. 2.4851 Dome Nut
ASTM B166 601 Inconel Dome Nut Inconel 601 Acorn Nut
Alloy 601 Studs UNS N06601 Acorn Nut
WERKSTOFF NR. 2.4851 Acorn Nut ASTM B166 601 Inconel Nuts & Washer
Inconel 601 Hex Head Screws Alloy 601 Hex Head Screws
UNS N06601 Hex Head Screws WERKSTOFF NR. 2.4851 Hex Head Screws
ASTM B166 601 Inconel Hex Head Screws Inconel 601 Socket Head Screws
Inconel 601 Socket Head Screws 601 Inconel Socket Head Screws
UNS N06601 Socket Head Screws WERKSTOFF NR. 2.4851 Socket Head Screws
ASTM B166 601 Inconel Socket Head Screws Inconel 601 Socket Set Screws
Alloy 601 Socket Set Screws UNS N06601 Socket Set Screws
Alloy UNS N06601 Socket Set Screws ASTM B166 601 Inconel Socket Set Screws
Inconel 601 Anchor Screws Inconel 601 Threaded Rod
Inconel 601 Blind Rivet UNS N06601 Nut and Bolt
WERKSTOFF NR. 2.4851 Inconel Studs ASTM B166 601 Inconel Blind Rivet
Inconel 601 Threaded Screws Inconel 601 Shoulder Screws
Inconel 601 Panel Screws Inconel 601 Machine Screws
Alloy 601 Machine Screws UNS N06601 Machine Screws
WERKSTOFF NR. 2.4851 Machine Screws ASTM B166 601 Inconel Machine Screws
Inconel 601 Washer Alloy 601 Washers
Inconel UNS N06601 Washers Inconel WERKSTOFF NR. 2.4851 Washer
ASTM B166 601 Inconel Washer Alloy 601 Machine Washer
Inconel Alloy 601 Bolts and Nuts Inconel UNS N06601 Nut and Bolt
ASTM B166 601 Inconel Machine Washer Inconel Alloy 601 Star Washer
Alloy 601 Star Washers Inconel UNS N06601 Star Washers
Inconel WERKSTOFF NR. 2.4851 Star Washer Inconel 601 Flat Washers
Alloy 601 Flat Washer UNS N06601 Hex Bolts
Inconel Alloy 601 Flat Washer Inconel UNS N06601 Flat Washer
Inconel WERKSTOFF NR. 2.4851 Flat Washers ASTM B166 601 Inconel Flat Washer
Inconel 601 Lock Washer Inconel 601 Sealing Washer

Specialized in Inconel 601 Aerospace Bolts, check the list of Inconel 601 Bolts in India:

Manufacturing Alloy 601 Fasteners in India, specialist of self-sealing screws, nuts, bolts, rivets and washers to sealing switch boots, panel bushing seals and panel switch.

Inconel 601 Fasteners Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
601 min. Bal 21.0 58.0
max. 0.10 1.0 0.5 Bal 0.015 25.0 1.0 63.0

Inconel 601 Fasteners mechanical properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
601 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40

Equivalent Grades for Inconel 601 Washer, Nuts & Bolts

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 601 N06601 NA 49 NiCr23Fe 2.4851 NC23FeA XH60BT NCF 601

Inconel 601 Fasteners Weight Chart

Click on below links for fasteners weight chart

Supplying Inconel 601 Fasteners to our worldwide clients:

Siddhagiri is a leading independent Alloy 601 Screws exporter in India. All of our ASTM B166 601 Inconel Bolts are manufactured and tested to international standards, and specifications as per ASTM. SMT has been a trusted vendor as a ASTM B166 UNS N06601 Bolts distributor & dealer in your country. With over 65 countries, we provide high quality service and fast delivery.

Country Days Country Days
UAE 15 UK 35
Saudi Arabia 15 Egypt 40
Australia 30 Qatar 15
USA 45 Canada 45
Bahrain 15 Kenya 40
Malaysia 15 Poland 15
Iran 7 Singapore 14
Nigeria 40 Ethiopia 40
Vietnam 20 Albania 20
Turkey 30 Tanzania 30
Thailand 20 Zambia 40
Italy 40 India 7
Namibia 40 Indonesia 20
South Africa 40 Australia 40
Libya 40 Syria 40
Uganda 40 Angola 40
Kazakhstan 20 Algeria 20

Stock an extensive range of ASTM B166 Inconel 601 Bolts, Inconel 601 Fasteners suppliers in Mumbai, India
Manufacting high-class ASME SB166 Alloy 601 Bolts in India, offer lowest price of B166 Alloy 601 Bolts, contact Inconel 601 Bolts manufacturers in Mumbai, Pune & Chennai - India