Siddhagiri Metals & Tubes Logo

Inconel 625 Fasteners manufacturer

Inconel 625 hex Bolts and Alloy 625 self Tapping Screws suppliers in Mumbai

Inconel 625 Cap Screws, Inconel 625 Carriage Bolts, Inconel 625 Elevator Bolts stock at best price in India

Wide Size Range in Inconel 625 Flange Bolts, Inconel 625 Heavy Hex Head Bolts, Inconel 625 Plow Bolts and Inconel 625 Nuts.

ASME SB446 Nickel Elevator Bolts, ASTM B446 UNS N06625 Heavy Hex Head Bolts, DIN 2.4856 Inconel 625 Screws exporter in India

Inconel 625 Fasteners

Inconel 625 Fasteners

Inconel 625 Nuts

Inconel 625 Nuts

Inconel 625 Bolts

Inconel 625 Bolts

Inconel 601 Screws

Inconel 625 Screws

Inconel 601 Threaded Rod

Inconel 625 Threaded Rod

Inconel 601 Studs

Inconel 625 Studs

 

Inconel 625 Bolts offers a very high resistance to corrosion and as such it is used in a number of sea-water applications such as washers, nuts, seals and bolts. Inconel 625 Hex Head Bolt is also used in gas turbine engine ducting, heat shields, spray bars, combustion liners and furnace hardware. Inconel 625 Fasteners used a lot in a wide range of applications, as it has very good aqueous corrosion resistance, it has excellent weldability and also due to its strength. The strength of Inconel 625 can be attributed mainly due to the solution effect that is derived from columbium and molybdenum. With Inconel 625, precipitation hardening treatments are not necessary. This is because Inconel 625 is on a nickel-chromium matrix and it gets its stiffening effect from niobium and molybdenum. Because of this combination of elements, Inconel 625 Nuts offers very high resistance to a large number of highly corrosive environments and it can also withstand high-temperature effects such as the likes of carburization and oxidation. Because of the properties of Inconel 625 Stud, it is by far one of the best choices for freedom from local attacks such as crevice corrosion and pitting. Inconel 625 Screws also offers very high tensile strength, resistance to chloride-in stress-corrosion cracking and high corrosion-fatigue strength. Because of the characteristics of Inconel 625, Inconel 625 Threaded Rod is widely used in many sea-water applications such as: steam-line bellows, navy utility boat exhaust ducts, auxiliary propulsion motors in submarines, undersea communication cable sheathing, motor patrol gunboat propeller blades, transducer controls in submarines, mooring cable wire rope and quick disconnect fittings of submarines.

Inconel 625 Fasteners Specifications

INCONEL 625 FASTENERS - SCREWS, BOLTS AND NUTS FOR TOUGHEST USE

Inconel 625 Fasteners Material Inconel 625 Fasteners
Inconel 625 Fasteners/ Bolts Size M 02 to M 160
Length 3 mm to 200 mm
Inconel 625 Bolts, Studs Threads: METRIC, BSW, BSF, UNC, UNF or as required
Alloy 625 Fasteners Standard: DIN, ISO, JIS, GB, IS, BS, ASTM
ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Alloy 625 Stud Bolt length are defined in ASME B16.5 standard
  • Alloy 625 Hex nuts are defined in ASME B18.2.2
  • ASME B18.5

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

SCOPE OF MANUFACTURE
  • Hot Forged Inconel 625 Fasteners, Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Inconel 625 Fasteners, Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Inconel 625 Fasteners In Form of:

Hex, Square, Round, Threading as per Gauge Etc.

Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Inconel 625 bolting Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Inconel 625 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100,
machining and CNC for Customized connecting element
Inconel 625 Fasteners Origin and service-region: European
Origin of Inconel 625 Fasteners are Western European. However projects with eastern origin are possible on request.
Inconel 625 bolting materials Surface Coating:
  • Hot Dipped Galvanizing Alloy 625 Fasteners
  • Phosphate Alloy 625 Fasteners
  • Teflon Alloy 625 Fasteners
  • Ptfe Coated Alloy 625 Fasteners
  • Xylon Alloy 625 Fasteners
  • Zinc Alloy 625 Fasteners
  • Cadmium Alloy 625 Fasteners

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Top Manufacturers of Alloy 625 Fasteners SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
Main Types of Alloy 625 Bolts Inconel 625 Hex Head Bolt, Square Bolt, U Bolt, Eye Bolt, T Bolt, Hex Bolt, Lag Bolt, Counter sunk Bolt etc.
Main Types of Alloy 625 Nut Inconel 625 Hex Head Nut, Square Nut, Lock Nut, Eye Nut, Wing Nut, T Nut, Panel Nut, Coupling Nut, Dome Nut, Acorn Nut etc.
Main Types of Alloy 625 Screw Inconel 625 Hex Head Screw, Socket Head Screw, Socket Set Screw, Anchor Screw, Blind Rivet, Concrete Screw, Threaded Screw, Shoulder Screw, Panel Screw, Machine Screw etc.
Main Types of Alloy 625 Washer Inconel 625 Machine Washers, Star Washers, Lock Washer, Sealing Washer, Split Washer etc.
Inconel 625 Fasteners Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

Inconel 625 Fasteners size range

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish 3.00 – 75.00 1/8" – 3.00" h8-h9-h10-h11
Cold Drawn and Ground 10.00 – 75.00 5/6" – 2.50" h8-h9-h10-h11
Peeled and Polished 40.00 – 150.00 1.50" – 6.00" h11, h11-DIN 1013
Peeled and Ground 20.00 – 50.00 3/4″ – 2.00" h9-h10-h11

 

Types of Inconel 625 Fasteners

Types of Inconel 625 Nuts

INCONEL 625 NUTS

Inconel 601 Nuts

Inconel 625 Hexagon nuts
with flange

Inconel 601 Nuts

Inconel 625 Hexagon nuts
with flange

Inconel 601 Nuts

Inconel 625 Hexagon nuts with flange with metric fine thread

Inconel 601 Nuts

Inconel 625 Hexagon nuts with (non-metallic insert) type1

Inconel 601 Nuts

Inconel 625 Hexagon nuts with (all-metal nuts), type 2

Inconel 601 Nuts

Inconel 625 Hexagon nuts, style 1 – Product grades A and B

Inconel 601 Nuts

Inconel 625 Hexagon nuts, style 2 – Product grades A and B

Inconel 601 Nuts

Inconel 625 Hexagon nuts, low type (chamfered)

Inconel 601 Nuts

Inconel 625 Low hex nuts without bevel – Classification B

Inconel 601 Nuts

Inconel 625 Hexagon nuts, style 1, with metric fine thread

Inconel 601 Nuts

Inconel 625 Hexagon nuts, style 2, with metric fine thread

Inconel 601 Nuts

Inconel 625 Low hex nuts (chamfered) with metric fine pitch thread

Inconel 601 Nuts

Inconel 625 Hexagon nuts with flange and (with non-metallic insert)

Inconel 601 Nuts

Inconel 625 Hexagon nuts with metric fine thread

Inconel 601 Nuts

Inconel 625 Hexagon nuts with (all-metal nuts)

Inconel 601 Nuts

Inconel 625 Hexagon nuts with clamping part

Inconel 601 Nuts

Inconel 625 Hexagon nuts with low form, (with non-metallic insert)

Inconel 601 Nuts

Inconel 625 Castle nuts low form (with roll crown)

Inconel 601 Nuts

Inconel 625 crown nuts (without roll crown)

Inconel 601 Nuts

Inconel 625 crown nuts (with roll crown)

Inconel 601 Nuts

Inconel 625 Castle nuts low form (without roll crown)

Inconel 601 Nuts

Inconel 625 Hexagon nuts

Inconel 601 Nuts

Inconel 625 Closed nuts

Inconel 601 Nuts

Inconel 625 Cross hole nuts

Inconel 601 Nuts

Inconel 625 slot nuts

Inconel 601 Nuts

Inconel 625 locknuts

Inconel 601 Nuts

Inconel 625 knurled

Inconel 601 Nuts

Inconel 625 knurled nuts, low form

 

 

Type of Inconel 625 Screws

INCONEL 625 CAP SCREWS

Inconel 601 Screws

ISO 1207 Slotted cheese head screws, Inconel 625

Inconel 601 Screws

ISO 7048 H cylinder head screws with cross recession, shape H, Inconel 625

Inconel 601 Screws

ISO 7048 Z cylinder head screws with cross recession, shape Z, Inconel 625

Inconel 601 Screws

ISO 1580 flat head screw, product grade A, Inconel 625

Inconel 601 Screws

ISO 7045 H flathead screws with Phillips, form H – Product grade A, Inconel 625

Inconel 601 Screws

ISO 7045 Z flathead screws with Phillips, form Z – Product grade A, Inconel 625

Inconel 601 Screws

ISO 21269 Machine screws with hexagon and metric fine thread, Inconel 625

Inconel 601 Screws

ISO 4762 Machine screws with hexagon, Inconel 625

Inconel 601 Screws

ISO 14579 cheese head screws with hexagon socket, Inconel 625

Inconel 601 Screws

ISO 14580 cheese head screws with hexagon socket, low head, Inconel 625

Inconel 601 Screws

ISO 7380-1 screw with flattened Panhead – Part 1: Bolts with flattened Panhead with Allen, Inconel 625

Inconel 601 Screws

ISO 14583 flat-head screws with hexagon socket, Inconel 625

Inconel 601 Screws

CSN 02 1128 capstan screw, Inconel 625

Inconel 601 Screws

DIN 920 flat head screws with small head, Inconel 625

 


INCONEL 625 SCREWS

Inconel 601 Screws

ISO 4026 screws with hexagon socket flat point, Inconel 625

Inconel 601 Screws

ISO 4027 screws with hexagon socket and flattened tip, Inconel 625

Inconel 601 Screws

ISO 4028 screws with hexagon socket and pin, Inconel 625

Inconel 601 Screws

ISO 4029 screws with hexagon socket and serrated, Inconel 625

Inconel 601 Screws

ISO 2342 Slotted set screws with shank, Inconel 625

Inconel 601 Screws

EN 24766 Slotted set screws with flat point, Inconel 625

Inconel 601 Screws

EN 27434 set screws with slot and point, Inconel 625

Inconel 601 Screws

EN 27435 set screws with mortise and tenon, Inconel 625

Inconel 601 Screws

EN 27436 Slotted set screws with cup point, Inconel 625

Inconel 601 Screws

CSN 02 1187 screws with hexagon socket flat point, Inconel 625


INCONEL 625 TAPPING SCREW

Inconel 601 Screws

ISO 1479 C Hexagon head tapping screws, form C
, Inconel 625

Inconel 601 Screws

ISO 1479 F Hexagon head tapping screws, form F , Inconel 625

Inconel 601 Screws

ISO 1481 C Flathead-tapping screws, form C, Inconel 625

Inconel 601 Screws

ISO 1481 F Flathead-tapping screws, form F, Inconel 625

Inconel 601 Screws

ISO 1482 C Senk-tapping screws, form C, Inconel 625

Inconel 601 Screws

ISO 1482 F Senk-tapping screws, form F, Inconel 625

Inconel 601 Screws

ISO 1483 C Slotted-tapping screws, form C, Inconel 625

Inconel 601 Screws

ISO 1483 F Slotted-tapping screws, form F, Inconel 625

Inconel 601 Screws

ISO 7049 CH pan head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7049 CZ pan head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7049 FH pan head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7049 FZ pan head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7050 CH Senk-tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7050 CZ Senk-tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7050 FH Senk-tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7050 FZ Senk-tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7051 CH raised countersunk head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7051 CZ raised countersunk head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7051 FH raised countersunk head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 7051 FZ raised countersunk head tapping screws Phillips, Inconel 625

Inconel 601 Screws

ISO 15480 Hexagon Screws with collar with tapping screw thread, Inconel 625

Inconel 601 Screws

ISO 15481 H Flathead Screws with Phillips, Form H, Inconel 625

Inconel 601 Screws

ISO 15483 H Raised head Screws with Phillips with tapping screw thread, Form H, Inconel 625

Inconel 601 Screws

ISO 15483 Z Raised head Screws with Phillips with tapping screw thread, form Z , Inconel 625

Inconel 601 Screws

ISO 15482 H Senk-drilling screws with Phillips with tapping screw thread, Form H, Inconel 625

Inconel 601 Screws

ISO 15482 Z Senk-drilling screws with Phillips with tapping screw thread, form Z, Inconel 625


INCONEL 625 COUNTERSUNK SCREWS

Inconel 601 Screws

ISO 10642 countersunk screws with hexagon socket, Inconel 625

Inconel 601 Screws

ISO 14584 flat-head screws with hexagon socket, Inconel 625

Inconel 601 Screws

ISO 2009 Slotted countersunk head screws (common head style) product class A, Inconel 625

Inconel 601 Screws

ISO 7046-1 H countersunk screws (common head) with Phillips, form H – Product grade A, Inconel 625

Inconel 601 Screws

ISO 7046-1 Z countersunk screws (common head) with Phillips, form Z – Product grade A, Inconel 625

Inconel 601 Screws

ISO 7046-2 H1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 1, Inconel 625

Inconel 601 Screws

ISO 7046-2 H2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 2, Inconel 625

Inconel 601 Screws

ISO 7046-2 Z1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 1, Inconel 625

Inconel 601 Screws

ISO 7046-2 Z2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 2, Inconel 625

Inconel 601 Screws

ISO 2010 Raised Countersunk head slot (unit head) Classification A, Inconel 625

Inconel 601 Screws

ISO 7047 H Raised Countersunk head (unit head) with Phillips – product class A, Form H, Inconel 625

Inconel 601 Screws

ISO 7047 Z Raised Countersunk head (unit head) with Phillips – product class A, Form Z, Inconel 625

     

INCONEL 625 OTHER SCREWS

Inconel 601 Screws

CSN 02 1121 Inconel 625 Four head bolts with dog point

Inconel 601 Screws

CSN 02 1122 Inconel 625 Square heads bolts with collar and half dog point with rounded end

Inconel 601 Screws

CSN 02 1161 Inconel 625 Screws, tall form

Inconel 601 Screws

CSN 02 1161 Inconel 625 Screws, tall form

Inconel 601 Screws

CSN 02 1162 Inconel 625 Screws, low form

Inconel 601 Screws

CSN 02 1167 Inconel 625 eyebolts

Inconel 601 Screws

CSN 02 1174 Inconel 625 Studs – = 1d

Inconel 601 Screws

CSN 02 1174 Inconel 625 Studs – = 1d

Inconel 601 Screws

CSN 02 1176 Inconel 625 Studs – = 1.25d

Inconel 601 Screws

CSN 02 1176 Inconel 625 Studs – = 1.25d

Inconel 601 Screws

CSN 02 1178 Inconel 625 Studs – = 2d

Inconel 601 Screws

CSN 02 1178 Inconel 625 Studs – = 2d

Inconel 601 Screws

CSN 02 1341 Inconel 625 screws T (M10 – M36x3)

Inconel 601 Screws

CSN 02 1341 Inconel 625 screws T (M42x3 – M100x4)

 

Type of Inconel 625 Bolts

INCONEL 625 HEX BOLTS

INCONEL 600 HEX BOLTS

EN 1665 F Inconel 625 Hexagon bolts with flange, heavy series, Form F

INCONEL 600 HEX BOLTS

ISO 4014 Inconel 625 Hexagon bolts with shaft, product classes A and B

INCONEL 600 HEX BOLTS

ISO 4017 Inconel 625 Hexagon bolts with thread to the head – Product grades A and B

INCONEL 600 HEX BOLTS

ISO 8676 Inconel 625 Hexagon bolts with thread to head, metric fine thread

INCONEL 600 HEX BOLTS

ISO 8765 Inconel 625 Hexagon head bolts with shank, metric fine thread

INCONEL 600 HEX BOLTS

ISO 4018 Inconel 625 Hexagon bolts with thread to head

INCONEL 600 HEX BOLTS

ISO 4016 Inconel 625 Hexagon bolts with shaft, product class C

INCONEL 600 HEX BOLTS

EN 24015 Inconel 625 Hexagon head bolts with shank, relieved shank

INCONEL 600 HEX BOLTS

CSN 02 1104 Inconel 625 Bright hexagon bolts with hole in the head

INCONEL 600 HEX BOLTS

CSN 02 1105 Inconel 625 Bright hexagon bolts with slot

INCONEL 600 HEX BOLTS

CSN 02 1105 B Inconel 625 Bright hexagon bolts with slot

       

Type of Inconel 625 Washers

INCONEL 625 WASHERS

Inconel 601 Washers

ISO 7090 Flat washers normal series, Inconel 625

Inconel 601 Washers

ISO 7089 Flat washers normal series, Inconel 625

Inconel 601 Washers

ISO 7091 Flat washers normal series, Inconel 625

Inconel 601 Washers

ISO 7092 Flat washers small series, Inconel 625

Inconel 601 Washers

ISO 7093-1 Plain washers, large series, Inconel 625

Inconel 601 Washers

ISO 7093-2 Plain washers, large series, Inconel 625

Inconel 601 Washers

ISO 7094 Flat washers, Extra large series, Inconel 625

Inconel 601 Washers

ISO 10673 L Plain washers for bolts, Inconel 625

Inconel 601 Washers

ISO 10673 N Plain washers for bolts, Inconel 625

Inconel 601 Washers

ISO 10673 S Plain washers for bolts, Inconel 625

Inconel 601 Washers

EN 28738 Washers for clevis pins, Inconel 625

Inconel 601 Washers

CSN 02 1740 spring rings with square cross section, Inconel 625

Inconel 601 Washers

CSN 02 1741 spring rings with rectangular cross-section, Inconel 625

   

Types of Inconel 625 metric threaded bolts and machine screws

Hex Head Bolts ISO 4014 (DIN 931), Inconel 625 Hex Head Set screws ISO 4017 (DIN 933), Inconel 625
Hex Head Flange Bolts ISO 1665 (DIN 6921), Inconel 625 Slotted Hex Head Setscrews (DIN 933), Inconel 625
Socket Head Cap Screws ISO 4762 (DIN 912), Inconel 625 Socket Head Cap Screws With Fine Thread ISO 4762 (DIN 912), Inconel 625
Socket Head Cap Screws With Full Thread ISO 4762 (DIN 912), Inconel 625 Unbrako Socket Head Cap Screws ISO 4762, Inconel 625
Torx Head Cap Screws ISO 14579 (sim. DIN 912), Inconel 625 Socket Low Head Cap Screws DIN 7984, Inconel 625
Torx Cap Screws With Low Head ISO 14580 (sim. DIN 7984), Inconel 625 Socket Head Button Screws ISO 7380 part 1, Inconel 625
Unbrako Socket Head Button Screws ISO 7380, Inconel 625 Torx Button Screws, Inconel 625
Pin Torx Button Screws, Inconel 625 Socket Head Button Screws With Flange ISO 7380 part 2, Inconel 625
Slotted Mushroom Head Screws, Inconel 625 Phillips Pan Head Machine Screws ISO 7045 (DIN 7985H), Inconel 625
Pozi Pan Machine Screws ISO 7045 (DIN 7985Z), Inconel 625 Phillips Raised Csk Machine Screws ISO 7047 (DIN 966H), Inconel 625
Pozi Raised Csk Machine Screws, Inconel 625 Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H), Inconel 625
Pozi Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965Z), Inconel 625 Slotted Raised Csk Machine Screws ISO 2010 (DIN 964), Inconel 625
Socket Head Countersunk Screws ISO 10642 (DIN 7991), Inconel 625 Unbrako Socket Head Countersunk Screws ISO 10642, Inconel 625
Slotted Csk Machine Screws ISO 2009 (DIN 963), Inconel 625 Torx Csk Head Screws ISO 14581, Inconel 625
Pin Torx Countersunk Screws, Inconel 625 Slotted Cheese Head Machine Screws ISO 1207 (DIN 84), Inconel 625
Slotted Pan Machine Screws ISO 1580 (DIN 85), Inconel 625 Torx Pan Head Screws ISO 14583, Inconel 625
One Way Security Screws, Inconel 625 Slotted Capstan Screws (DIN 404), Inconel 625
Flat Point Grub Screws ISO 4026 (DIN 913), Inconel 625 Cone Point Grub Screws ISO 4027 (DIN 914), Inconel 625
Cup Point Grub Screws ISO 4029 (DIN 916), Inconel 625 Dog Point Grub Screws ISO 4028 (DIN 915), Inconel 625
Carriage Bolts DIN 603, Inconel 625 Carriage Bolts and Nuts DIN 603 (Bolt) DIN 934 (Nut), Inconel 625
Wing Screws DIN 316 American Form, Inconel 625 Thumb Screws High Type (DIN 464), Inconel 625
Slotted Thumb Screws High Type (DIN 465), Inconel 625 Dowel Screw (Hanger Bolt) with metric and wood thread, and central hex drive, Inconel 625
Threaded Rods DIN 975, Inconel 625 Plastic Head Covers for Hex Screws/Nuts, Inconel 625

Types of Inconel 625 metric nuts

Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), Inconel 625 Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), Inconel 625
Full Hex Nuts With Left Hand Thread (DIN 934), Inconel 625 Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), Inconel 625
Half Nuts Fine Pitch ISO 4035, Inconel 625 Half Nuts With Left Hand Thread, Inconel 625
Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), Inconel 625 Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), Inconel 625
Aerotight All Metal Locking Nuts, Inconel 625 Stover Nuts, Inconel 625
Dome Nuts DIN 1587, Inconel 625 Dome Nyloc Nuts DIN 986, Inconel 625
Cap Nuts DIN 917, Inconel 625 Hex Serrated Flange Nuts EN 1661 (DIN 6923), Inconel 625
Hex Plain Flange Nuts, Inconel 625 Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, Inconel 625
Hex Serrated Flange Nuts with Nylon Insert, Inconel 625 Hexagon Nut (Type B) with height 1.5 x thread diameter, Inconel 625
Hexagon Nut with Collar and height 1.5 x thread diameter, Inconel 625 Wing Nuts DIN 315 American Form, Inconel 625
Wing Nuts DIN 315 German Form, Inconel 625 Thumb Nuts High Type DIN 466, Inconel 625
Square Nuts, Inconel 625 Square Thin Nuts, Inconel 625
Sleeve Nuts With Pan Head and Slot, Inconel 625 Studding Connector Nuts, Inconel 625
Castle Nuts DIN 935, Inconel 625 Hexagon Coupler Nut, Inconel 625
Round Coupler Nut, Inconel 625 Counter Nuts DIN 7967, Inconel 625
Hexagon Weld Nuts, Inconel 625 Square Weld Nuts DIN 928, Inconel 625
Cage Nuts - Metric Thread, Inconel 625 Pronged Tee Nuts (4 Prongs), Inconel 625
Slotted Round Nuts for hook spanner DIN 1804, Inconel 625 Plastic Head Covers for Hex Screws/Nuts, Inconel 625

Bolts. A listing of common bolt types and styles.

Unified Inch Coarse and Fine Threads
Bolt Size Threads per Inch
Frac. [No.] Decimal UNC UNF
1/8 [#6] 0.1380 32 40
5/32 [#8] 0.1640 32 36
3/16 [#10] 0.1900 24 32
1/4 0.2500 20 28
5/16 0.3125 18 24
3/8 0.3750 16 24
7/16 0.4375 14 20
1/2 0.5000 13 20
9/16 0.5625 12 18
5/8 0.6250 11 18
3/4 0.7500 10 16
7/8 0.8750 9 14
1 1.0000 8 12, 14
1 1/8 1.1250 7 12
1 1/4 1.2500 7 12
1 3/8 1.3750 6 12
1 1/2 1.5000 6 12
1 3/4 1.7500 5 -

Inconel 625 Bolts Type: BOLTS, SETS, CUP SQUARE, COACH SCREW, SOCKET CAP, SOCKET COUNTERSUNK, SOCKET BUTTON

Inconel 625 Screws Type SIZE GRADE ASME ISO ASTM
Inconel 625 Socket Head Cap Screw M1.6 to M64 12.9 B18.3.1 M 4762 A574M
Inconel 625 Socket Low Head Cap Screw M4 to M20 10.9
Inconel 625 Socket Head Shoulder Screw M6 to M24 012.9 B18.3.3M
Inconel 625 Countersunk Socket Head Screw M3 to M20 012.9 B18.3.5M 10642 F835M
Inconel 625 Button Head Socket Screw M3 to M12 012.9 B18.3.4M 7380 F835M
Inconel 625 Flange Button Head Socket Screw M3 to M10 012.9 F835M
Inconel 625 Knurled Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Inconel 625 Flat Point Socket Set Screw M6 to M12 45H B18.3.6M 4026 F912M
Inconel 625 Dog Point Socket Set Screw M3 to M20 45H B18.3.6M 4028 F912M
Inconel 625 Cone Point Socket Set Screw M3 to M12 45H B18.3.6M 4027 F912M
Inconel 625 Plain Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Inconel 625 Taper Pressure Plug M8 to M22 -

Inconel 625 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Inconel 625 Hex Head Bolt / Screw M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

Inconel 625 Nuts Type SIZE PROPERTY CLASS STANDARD
Inconel 625 Hex Nut M6 to M42 10 ISO 4032
Inconel 625 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
Inconel 625 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
Inconel 625 Hex Weld Nut M6 to M12 8 DIN 929

Inconel 625 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, Inconel 625 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, Inconel 625 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, Inconel 625 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, Inconel 625 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.

Hexagon Bolts / Set Screws Stud Bolts Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screw and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screw Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

 

Inconel 625 Fasteners Composition

Chemical Composition of Inconel 625 Fasteners
Grade C Mn Si S Cu Fe Ni Cr
Inconel 625 0.10 max 0.50 max 0.50 max 0.015 max - 5.0 max 58.0 min 20.0 - 23.0

Mechanical Properties of Inconel 625 Fasteners
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Physical Properties of Inconel 625 Fasteners
Element Density Melting Point Specific Heat Magnetic Permeability (75°F, 200 oersted):
Inconel 625 0.306 (m g/m3) 2470-2575°F 0.106 Btu/lb x °F (444 J/kg-°C) 1.010

 

Equivalent Grades of Inconel 625 Fasteners

STANDARD
WERKSTOFF NR.
UNS
ASTM
ASME
Inconel 625
2.4856
N06625
B 446
SB 446

 

 

  Alloy 625 Nuts and Bolts Price List

Inconel 625 hex bolt and nut US $0.01-$0.50 / Piece
Inconel 625 cotter pin bolt manufacturer US $0.10-$5.00 / Piece
Din975 High quality M8 Inconel Alloy 625 bolt price per piece US $0.50-$2.00 / Piece
INCONEL 625 / 2.4856/ N06625 HEX CAP SCREW / BOLT US $0.10-$100.00 / Piece
Din975 High quality M8 Inconel 625 bolt price per piece US $0.50-$2.00 / Piece
High quality Inconel 625 price stud bolts with hex nut US $0.01-$2.00 / Piece
Inconel 625 UNS N06625 2.4856 Inconel 625 stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Cheap inconel 625 hex bolt and nut US $0.04-$0.60 / Piece
High quality M8 Inconel 625 bolt price per piece US $0.50-$2.00 / Piece
Inconel 625 UNS N06625 2.4856 Inconel 625 12 Point Flange Bolt US $3.20-$3.60 / Pieces
China supplier best price Iso 4017 Inconel 625 Hex Bolt And Nut US $0.05-$1.00 / Piece
Inconel 625 UNS N06625 DIN/EN 2.4856 12 point bolt flange shoulder bolt U bolt eye bolt US $10.50-$12.00 / Pieces
M8~M72 Inconel 625 alloy steel bolt price per piece US $0.20-$2.00 / Piece
UNS N06625 Inconel 625 2.4856 Inconel 625 Big NUT Heavy hex Nut US $14.80-$15.60 / Pieces
INCONEL 625 / 2.4856 / UNS N06625 hex nut 3/8-16 5/16-18 US $0.20-$0.50 / Pieces