Monel Fasteners suppliers

Monel Fasteners suppliers

Monel 400 Screws & Monel Bolts suppliers in Mumbai, India

Cheap ASTM F467 Monel 400 Bolts and Nuts, UNS N04400 Alloy 400 Socket Head Cap Screws at Factory price in India

Monel Fasteners suppliers
Monel Fasteners suppliers
Monel Bolts & Nuts
Monel Bolts & Nuts
Monel Screws
Monel Screws

Monel Fasteners are widely used as they are one of the few materials available that can withstand contact with hydrogen fluoride, hydrofluoric acid, fluorine or derivatives of theirs. In fact, Monel 400 Bolts has such strong resistance, that it cannot even be affected by hydrofluoric acid, no matter what the concentration, even though it might be the boiling point of hydrofluoric acid. Monel 400 Bolts and Nuts has also been found to resist hydrochloric acids and sulfuric acids, under reducing conditions. In most industrial water applications and fresh water applications, Monel 400 Fasteners can resist pitting and stress corrosion cracking.

Monel 400 Hex Head Bolt are used in a wide number of applications such as in petroleum refining in storage and piping tanks, crude petroleum stills and alkylation units. Monel Metal Screws are also used as marine components in shipbuilding pumps, shafts, valves and in brackish water and in the sea. It is also used in oil and gas production in sour gas applications and in splashzones for offshore structures. Monel 400 Screw can also be found in use in water treatment in seawater desalination plant evaporators and in brine heaters. Monel 400 Threaded Rod is also used in chemical processing equipment in hydrochloric acid, dry chlorine service, fluorine, neutral and alkaline salt solutions, sulfuric acid, hydrofluoric acid, nonoxidizing halides, hydrogen fluoride and caustic alkalies.

We manufacture bolts, nuts, anti-theft bolts & nuts, studs, foundation bolts, U-bolts, plain and spring washers in Monel 400 material in India. Monel 400 Socket Head Cap Screws are most popular fastener & can come with large cylindrical heads that have recessed hex-shaped drives. Due to this quality these Monel 400 Screws are mainly in demand by the applications where clearance is limited, and sockets and wrenches can't be used. The size of a Monel 400 metric screws or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). The size of Monel 400 nuts, will appear as diameter and pitch.

Get suitable Monel Fasteners suppliers in Abu Dhabi, Bahrain, Singapore, Dubai, UK, Australia and South Africa.

Save up to 40% on Monel Bolts & Nuts. Visit factory of Monel Fastener manufacturers in India, ask for Monel Hex Bolts free sample.

Monel 400 Fasteners Price

Monel 400 / 2.4360/ N04400 HEX CAP SCREW / BOLT US $0.10-$100.00 / Piece
Monel 400 cotter pin bolt manufacturer US $0.10-$5.00 / Piece
Din975 High quality M8 Monel Alloy 400 bolt price per piece US $0.50-$2.00 / Piece
Monel 400 hex bolt and nut US $0.01-$0.50 / Piece
Din975 High quality M8 Monel 400 bolt price per piece US $0.50-$2.00 / Piece
High quality Monel 400 price stud bolts with hex nut US $0.01-$2.00 / Piece
Monel 400 UNS N04400 2.4360 Monel 400 stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Cheap Monel 400 hex bolt and nut US $0.04-$0.60 / Piece
High quality M8 Monel 400 bolt price per piece US $0.50-$2.00 / Piece
Monel 400 UNS N04400 2.4360 Monel 400 12 Point Flange Bolt US $3.20-$3.60 / Pieces
China supplier best price Iso 4017 Monel 400 Hex Bolt And Nut US $0.05-$1.00 / Piece
Monel 400 UNS N04400 DIN/EN 2.4360 12 point bolt flange shoulder bolt U bolt eye bolt US $10.50-$12.00 / Pieces
M8~M72 Monel 400 alloy steel bolt price per piece US $0.20-$2.00 / Piece
UNS N04400 Monel 400 2.4360 Monel 400 Big NUT Heavy hex Nut US $14.80-$15.60 / Pieces
Monel 400 / 2.4360 / UNS N04400 hex nut 3/8-16 5/16-18 US $0.20-$0.50 / Pieces

Please note this is an approx Cost of Alloy 400 Fasteners in India. For final Alloy 400 Bolts price list please mail us.

Monel 400 Fasteners applications

Monel Fasteners suppliers

Monel 400 Nuts and Bolts
Monel 400 Nuts and Bolts
Monel Alloy 400 Bolts and Nuts
Monel Alloy 400 Bolts and Nuts
Monel 400 Exhaust Bolts
Monel 400 Exhaust Bolts
Monel 400 Hex Bolts
Monel 400 Hex Bolts
Monel 400 Stud Bolts
Monel 400 Stud Bolts
Monel 400 M10 Bolts
Monel 400 M10 Bolts
Alloy 400 U Bolts
Alloy 400 U Bolts
Monel 400 Lag Bolts
Monel 400 Lag Bolts
Monel 400 Anchor Bolt
Monel 400 Anchor Bolt
Monel Alloy 400 Square U Bolts
Monel Alloy 400 Square U Bolts
Alloy 400 Carriage Bolts
Alloy 400 Carriage Bolts
Alloy 400 Countersunk Bolts
Alloy 400 Countersunk Bolts
Monel 400 Socket Head Cap Screws
Monel 400 Socket Head Cap Screws
Alloy 400 Set Screws
Alloy 400 Set Screws
Monel 400 Cap Screws
Monel 400 Cap Screws
Monel 400 Hex Cap Screws
Monel 400 Hex Cap Screws
Monel Alloy 400 Flat Head Screws
Monel Alloy 400 Flat Head Screws
Alloy 400 Machine Screws
Alloy 400 Machine Screws
Monel 400 Self Tapping Screws
Monel 400 Self Tapping Screws
Alloy 400 Self Drilling Screw
Alloy 400 Self Drilling Screw
Monel 400 Washers
Monel 400 Washers
Monel 400 Flat Washers
Monel 400 Flat Washers
Alloy 400 Belleville Washers
Alloy 400 Belleville Washers
Alloy 400 Spring Washers
Alloy 400 Spring Washers
Alloy 400 Nord Lock Washers
Alloy 400 Nord Lock Washers
Monel 400 Hex Nuts
Monel 400 Hex Nuts
Alloy 400 Barrel Nuts
Alloy 400 Barrel Nuts
Alloy 400 Wheel Nuts
Alloy 400 Wheel Nuts
Monel 400 Threaded Rod
Monel 400 Threaded Rod
Alloy 400 Threaded Inserts
Alloy 400 Threaded Inserts
Monel 400 Threaded Stud
Monel 400 Threaded Stud
Double End Threaded Rod
Double End Threaded Rod
Monel 400 Dowel Pins
Monel 400 Dowel Pins
Alloy 400 Spring Pin
Alloy 400 Spring Pin
Monel 400 Studs
Monel 400 Studs
Monel 400 Exhaust Studs
Monel 400 Exhaust Studs
Monel 400 Nuts and Washers
Monel 400 Nuts and Washers
Alloy 400 Rings
Alloy 400 Rings
Monel 400 Springs
Monel 400 Springs
Alloy 400 Hex Head Bolts
Alloy 400 Hex Head Bolts

Monel 400 Fasteners Specification

Monel 400 Fasteners Material Specification ASTM F 467 ASME SF 467, UNS 4400 Bolts
Standard DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards
Monel 400 Fasteners/ Bolts Size M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
Length 3 mm to 200 mm
Monel 400 Bolts, Studs Threads: METRIC, BSW, BSF, UNC, UNF or as required
Alloy 400 Fasteners Standard:

ANSI - American National Standards Institute

  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Alloy 400 Stud Bolt length are defined in ASME B16.5 standard
  • Alloy 400 Hex nuts are defined in ASME B18.2.2
  • ASME B18.5

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS - Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO - International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

Source of raw materials Tata Steel, JSPL, RINL, Usha Martin, Dhamm Steel, Mukund Steel etc.
SCOPE OF MANUFACTURE
  • Hot Forged Monel 400 Fasteners, Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Monel 400 Fasteners, Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Monel 400 Fasteners In Form of:

Hex, Square, Round, Threading as per Gauge Etc.

Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Monel 400 bolting Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Monel 400 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Monel 400 bolting materials Surface Coating:
  • Teflon Coated Fasteners
  • Phosphate Coated Fasteners
  • Zinc Coated Fasteners
  • Ptfe Coated Monel 400 Fasteners
  • Xylon Coated Fasteners
  • Cadmium Coated Fasteners
  • Hot Dipped Galvanizing Coated Fasteners

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Popular Types of Alloy 400 Bolts Monel 400 Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc.
Popular Types of Alloy 400 Nut Monel 400 Hex Head Nut, Eye Nut, Dome Nut, Wing Nut, T Nut, Panel Nut, Lock Nut, Coupling Nut, Square Nut, Acorn Nut etc.
Popular Types of Alloy 400 Screw Monel 400 Hex Head Cap Screws, Socket Set Screws, Anchor Screws, Blind Rivet, Socket Head Screws, Concrete Screws, Shoulder Screws, Panel Screws, Threaded Screws, Machine Screws etc.
Popular Types of Alloy 400 Washer Monel 400 Machine Washers, Flat Washer, Star Washers, Sealing Washer, Lock Washer, Split Washer etc.
Our stockyad location for fast delivery in India Ahmedabad, Tiruchirappalli, Thiruvananthapuram, Bhubaneswar, Mumbai, Hyderabad, Nashik, Pune, Vasai, Thane, Coimbatore, Agra, Chennai, Nagpur, Noida, Bengaluru, Dhanbad, Tirunelveli, Shivamogga, Pimpri-Chinchwad, Navi Mumbai
Monel 400 Fasteners Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

Alloy 400 Fasteners Sizes

Monel 400 Screws Type SIZE GRADE ASME ISO ASTM
Monel 400 Socket Head Cap Screws M1.6 to M64 12.9 B18.3.1 M 4762 A574M
Monel 400 Socket Low Head Cap Screws M4 to M20 10.9
Monel 400 Socket Head Shoulder Screws M6 to M24 012.9 B18.3.3M
Monel 400 Countersunk Socket Head Screws M3 to M20 012.9 B18.3.5M 10642 F835M
Monel 400 Button Head Socket Screws M3 to M12 012.9 B18.3.4M 7380 F835M
Monel 400 Flange Button Head Socket Screws M3 to M10 012.9 F835M
Monel 400 Knurled Point Socket Set Screws M3 to M20 45H B18.3.6M 4029 F912M
Monel 400 Flat Point Socket Set Screws M6 to M12 45H B18.3.6M 4026 F912M
Monel 400 Dog Point Socket Set Screws M3 to M20 45H B18.3.6M 4028 F912M
Monel 400 Cone Point Socket Set Screws M3 to M12 45H B18.3.6M 4027 F912M
Monel 400 Plain Point Socket Set Screws M3 to M20 45H B18.3.6M 4029 F912M
Monel 400 Taper Pressure Plug M8 to M22 -

Monel 400 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Monel 400 Hex Head Bolt / Screws M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

Monel 400 Nuts Type SIZE PROPERTY CLASS STANDARD
Monel 400 Hex Nut M6 to M42 10 ISO 4032
Monel 400 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
Monel 400 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
Monel 400 Hex Weld Nut M6 to M12 8 DIN 929

Monel 400 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, Monel 400 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, Monel 400 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, Monel 400 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, Monel 400 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Below table compares various metric sizes to the closest inch equivalent

Metric Closest Inch
M1.4-0.3 0-80 (Larger)
M2-0.4 1-64 (Smaller)
M2.5-0.45 3-56 (Larger)
M3-0.5 4-48 (Smaller)
M3.5-0.6 6-40 (Same)
M4-0.7 8-36 (Larger)
M5-0.8 10-32 (Smaller)
M6-1.0 1/4-28 (Larger)
M7-1.0 1/4-28 (Smaller)
M8-1.25 5/16-18 (Smaller)
M10-1.5 3/8-16 (Smaller)
M12-1.75 1/2-13 (Larger)
M14-2.0 9/16-12 (Larger)
M16-2.0 5/8-11 (Smaller)
M18-2.5 3/4-10 (Larger)
M20-2.5 3/4-10 (Smaller)
M22-2.5 7/8-9 (Larger)
M24-3.0 1-8 (Larger)
M30-3.5 1 1/8-7 (Smaller)
M36-4.0 1 3/8-6 (Smaller)

DIN and ISO designations

No. Description
DIN 84 Slotted Cheese Head Machine Screws
DIN 85 Slotted Pan Head Machine Screws
DIN 94 Cotter Pin
DIN 125A Flat Washer (without Chamfer)
DIN 125B Flat Washer (with Chamfer)
DIN 127B Split Lock Washer
DIN 137B Spring Wave Washer
DIN 315 Wing Nut
DIN 439B Machine Screws Hex Nut, Finished Hex Jam Nut
DIN 911 Long Arm Hex Key
DIN 912 Hex Socket Head Cap Screws
DIN 916 Hex Socket Set Screws
DIN 931 Hex Head Cap Screws Partially Threaded
DIN 933 Hex Head Cap Screws Fully Threaded
DIN 934 Finished Hex Nut
DIN 939 Double End Stud
DIN 960 Hex Head Cap Screws Partially Threaded
DIN 961 Hex Head Cap Screws Fully Threaded
DIN 963 Slotted Flat Head Machine Screws
DIN 964 Slotted Oval Head Machine Screws
DIN 965 Phillips Flat Head Machine Screws
DIN 966 Phillips Oval Head Machine Screws
DIN 975 Threaded Rod
DIN 980V Hex Steel Prevailing Torque Lock Nut
DIN 985 Hex Nylon Insert Lock Nut
DIN 6334 Rod Coupling Nut
DIN 6797A External Tooth Lock Washer
DIN 6797J Internal Tooth Lock Washer
DIN 6912 Hex Low Socket Head Cap Screws
DIN 6921 Hex Flange Head Screws
DIN 6923 Hex Flange Nut
ISO 7379 Hex Socket Head Shoulder Screws
ISO 7380 Hex Button Socket Head Cap Screws
DIN 7985 Phillips Pan Head Machine Screws
DIN 7991 Hex Flat Socket Head Cap Screws

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Prestige quality Monel 400 Fasteners suppliers in India offer these Alloy 400 Bolts in DIN, ISO, JIS or ANSI standard.

ASTM F467 400 Monel Fasteners Stock

Siddhagiri Metals is a full service Monel 400 Fasteners manufacturer & distributor in India

Siddhagiri is a manufacturer and supplier of Monel 400 Fasteners offering more than 6500 varieties in all types of Monel 400 fasteners in all sizes, built a distribution network with more then 65 countries globally.

Monel 400 Hex Head Bolts Alloy 400 Hex Head Bolts
400 Alloy Hex Head Bolts 400 Monel Hex Head Bolts
UNS N04400 Hex Head Bolts WERKSTOFF NR. 2.4360 Hex Head Bolts
ASTM F467 Monel 400 Hex Head Bolts Monel 400 Square Bolts
Alloy 400 Square Bolts UNS N04400 Square Bolts
ASTM F467 400 Monel Square Bolts Monel 400 U Bolts
Alloy 400 U Bolts ASTM F467 400 Monel U Bolts
Monel 400 Eye Bolts UNS N04400 Monel Nuts Bolts
WERKSTOFF NR. 2.4360 Eye Bolts ASTM F467 400 Monel Eye Bolts
Monel 400 T Bolts Alloy 400 T Bolts
WERKSTOFF NR. 2.4360 T Bolts ASTM F467 400 Monel Nuts and Bolts
Monel 400 Hex Bolts Alloy 400 Hex Bolts
400 Alloy Hex Bolts 400 Monel Hex Bolts
WERKSTOFF NR. 2.4360 Hex Bolts ASTM F467 400 Monel Hex Bolts
Monel 400 Lag Bolts Alloy 400 Lag Bolts
ASTM F467 400 Monel Lag Bolts Monel 400 Counter sunk Bolts
Alloy 400 Counter sunk Bolts UNS N04400 Counter sunk Bolts
WERKSTOFF NR. 2.4360 Counter sunk Bolts ASTM F467 400 Monel Nuts and Bolts
Monel 400 Hex Head Nut Alloy 400 Hex Head Nut
UNS N04400 Hex Head Nut WERKSTOFF NR. 2.4360 Hex Head Nut
Monel 400 Square Nut Alloy 400 Nut Bolt
UNS N04400 Square Nut WERKSTOFF NR. 2.4360 Square Nut
Monel 400 Lock Nut Alloy 400 Lock Nut
400 Alloy Lock Nut 400 Monel Lock Nut
UNS N04400 Lock Nut WERKSTOFF NR. 2.4360 Lock Nut
ASTM F467 400 Monel Lock Nut Monel 400 Eye Nut
Alloy 400 Eye Nut UNS N04400 Eye Nut
WERKSTOFF NR. 2.4360 Eye Nut Monel 400 wing Nut
Alloy 400 wing Nut UNS N04400 wing Nut
WERKSTOFF NR. 2.4360 wing Nut Monel 400 T Nut
Alloy 400 T Nut UNS N04400 Rings
WERKSTOFF NR. 2.4360 Nut Bolt ASTM F467 400 Monel Springs
Monel 400 Panel Nut Alloy 400 Panel Nut
UNS N04400 Panel Nut WERKSTOFF NR. 2.4360 Panel Nut
ASTM F467 400 Monel Panel Nut Monel 400 Coupling Nut
Alloy 400 Coupling Nut UNS N04400 Monel 400 Nuts and Bolts
WERKSTOFF NR. 2.4360 Threaded Rod ASTM F467 Monel 400 Coupling Nut
Monel 400 Dome Nut Alloy 400 Dome Nut
UNS N04400 Dome Nut WERKSTOFF NR. 2.4360 Dome Nut
ASTM F467 400 Monel Dome Nut Monel 400 Acorn Nut
Alloy 400 Studs Alloy UNS N04400 Bolts
WERKSTOFF NR. 2.4360 Acorn Nut ASTM F467 400 Monel Nuts & Washer
Monel 400 Hex Head Screws Alloy 400 Hex Head Screws
UNS N04400 Hex Head Screws WERKSTOFF NR. 2.4360 Hex Head Screws
ASTM F467 400 Monel Hex Head Screws Monel 400 Socket Head Screws
Monel 400 Socket Head Screws 400 Monel Socket Head Screws
UNS N04400 Socket Head Screws WERKSTOFF NR. 2.4360 Socket Head Screws
ASTM F467 400 Monel Socket Head Screws Monel 400 Socket Set Screws
Alloy 400 Socket Set Screws UNS N04400 Socket Set Screws
Alloy UNS N04400 Socket Set Screws ASTM F467 400 Monel Socket Set Screws
Monel 400 Anchor Screws Monel 400 Threaded Rod
Monel 400 Blind Rivet UNS N04400 Nut and Bolt
WERKSTOFF NR. 2.4360 Monel Studs ASTM F467 400 Monel Blind Rivet
Monel 400 Threaded Screws Monel 400 Shoulder Screws
Monel 400 Panel Screws Monel 400 Machine Screws
Alloy 400 Machine Screws UNS N04400 Machine Screws
WERKSTOFF NR. 2.4360 Machine Screws ASTM F467 400 Monel Machine Screws
Monel 400 Washer Alloy 400 Washers
Monel Keel Bolts Monel Hex Bolts
Monel Bolts & Nuts Monel Lock Nuts
Monel Rivet Nut Monel Screws Australia
Monel Screws UK Monel Wood Screws
Alloy 400 Star Washers Monel UNS N04400 Star Washers
Monel Machine Screws Monel 400 Flat Washers
Monel Set Screws Monel Metal Screws
Monel Boat Screws Monel Cap Screws
Monel Lock Washers Monel Socket Head Cap Screws
Monel Flat Head Screws Monel 400 Bolts and Nuts

Specialized in Monel 400 Aerospace Bolts, check the list of Monel 400 Bolts in India:

Manufacturing Monel 400 Bolts in India, specialist of self-sealing screws, nuts, bolts, rivets and washers to sealing switch boots, panel bushing seals and panel switch.

Monel 400 Fasteners Chemical Composition

Monel 400 Ni C Al Mn Si Fe Cu S Co Cr
63.0 min 0.3 max 0.50 max 2.0 max 0.5 max 1.0 – 2.5 28.0 – 34.0 0.02 max

Monel 400 Fasteners mechanical properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %

Equivalent Grades for Monel 400 Bolts and Nuts & Screws

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel 400 N04400 2.4360 NU-30M NiCu30Fe NW 4400 NA 13 МНЖМц 28-2,5-1,5

Monel 400 Fasteners Weight Chart

Click on below links for fasteners weight chart

Supplying Monel 400 Fasteners to our worldwide clients:

Siddhagiri is a leading independent Monel Fasteners exporter in India. All of our Monel Bolts & Nuts are manufactured and tested to international standards, and specifications as per ASTM. SMT has been a trusted vendor as a Monel 400 Bolts distributor & dealer in your country. With over 65 countries, we provide high quality service and fast delivery.

Country Days Country Days
Iran 7 Singapore 14
Malaysia 15 Poland 15
UAE 15 UK 35
Saudi Arabia 15 Egypt 40
Australia 30 Qatar 15
USA 45 Canada 45
Bahrain 15 Kenya 40
Vietnam 20 Albania 20
Turkey 30 Tanzania 30
Thailand 20 Zambia 40
Italy 40 India 7
Namibia 40 Indonesia 20
South Africa 40 Australia 40
Libya 40 Syria 40
Nigeria 40 Ethiopia 40
Uganda 40 Angola 40
Kazakhstan 20 Algeria 20

Stock an extensive range of Monel Hex Bolts, Monel Fasteners suppliers in Mumbai, India
Manufacting high-class Monel Screws in India, offer lowest price of Monel 400 Bolts and Nuts, contact Monel 400 Bolts manufacturers in Mumbai, Pune & Chennai - India