Nickel 201 Fasteners

Nickel 201 Fasteners Manufacturer

Nickel 201 hex Bolts and Alloy 201 self Tapping Screws suppliers in Mumbai

Nickel 201 Cap Screws, Nickel 201 Carriage Bolts, Nickel 201 Elevator Bolts stock at best price in India

Wide Size Range in Nickel 201 Flange Bolts, Nickel 201 Heavy Hex Head Bolts, Nickel 201 Plow Bolts and Nickel 201 Nuts.

ASME SB164 Nickel Elevator Bolts, ASTM B160 UNS N02201 Heavy Hex Head Bolts, Nickel 201 Screws exporter in India

Nickel 201 Fasteners

Nickel 201 Fasteners

Nickel 201 Nuts

Nickel 201 Nuts

Nickel 201 Bolts

Nickel 201 Bolts

Nickel 201 Screws

Nickel 201 Screws

Nickel 201 Threaded Rod

Nickel 201 Threaded Rod

Nickel 201 Studs

Nickel 201 Studs

 

At room temperature, Nickel 201 Bolt is resistant to dry gases, alkalis and acids. Depending on the concentration of the solution and the temperature, Nickel 201 is also resistant to mineral acids. Nickel 201 Fasteners composition is Nickel, Ni ≥ 99. Iron, Fe ≤ 0.4. Manganese, Mn ≤ 0.35. Silicon, Si ≤ 0.35. Copper, Cu ≤ 0.25. Carbon, C ≤ 0.020 and Sulfur, S ≤ 0.010. Because of these characteristics, Nickel 201 Nuts finds use in many applications such as electronic components, caustic evaporators, plater bars and combustion boats. Nickel 201 Hex Bolt is available in other designations and these include DIN 17750 – 17754, ASTM B 725, ASME SB-160 – SB 163, ASTM B 160 - B 163, ASTM B730, DIN 17740, SAE AMS 5553 and BS 3072-3076. Nickel 201 properties is that it has a Density of 0.321 lbs/in3 (8.89 g/cm3). The Modulus of Elasticity of Nickel 201 is 78 ºF (26 ºC) [29.7 x 103 ksi, 205 GPa] Nickel 201 has a Specific Heat of 456 J/kg-°K (0–100 °C) [0.109 BTU/lb-°F (32–212 °F)]. Nickel 201 has a Thermal Conductivity of 212 °F (100 °C) [463 BTU-in/ft2-h- °F, 66.5 W/m- °C]. Nickel 201 Screw is used in many kinds of applications and these include the likes of synthetic fiber production, chemical storage and chemical processing. Nickel 201 Threaded Rods are also used in the food processing industry. Besides this, such alloy 201 fastener is also used in the defense and aerospace sectors. Nickel 201 is also used in various types of processes where fluorine and sodium hydroxide are used.

Nickel 201 Fasteners Specifications

NICKEL 201 FASTENERS - SCREWS, BOLTS AND NUTS FOR TOUGHEST USE

Nickel 201 Fasteners Material Nickel 201 Fasteners
Nickel 201 Fasteners/ Bolts Size M 02 to M 160
Length 3 mm to 200 mm
Nickel 201 Bolts, Studs Threads: METRIC, BSW, BSF, UNC, UNF or as required
Alloy 201 Fasteners Standard: DIN, ISO, JIS, GB, IS, BS, ASTM
ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Alloy 201 Stud Bolt length are defined in ASME B16.5 standard
  • Alloy 201 Hex nuts are defined in ASME B18.2.2
  • ASME B18.5

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

SCOPE OF MANUFACTURE
  • Hot Forged Nickel 201 Fasteners, Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Nickel 201 Fasteners, Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Nickel 201 Fasteners In Form of:

Hex, Square, Round, Threading as per Gauge Etc.

Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Nickel 201 bolting Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Nickel 201 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100,
machining and CNC for Customized connecting element
Nickel 201 Fasteners Origin and service-region: European
Origin of Nickel 201 Fasteners are Western European. However projects with eastern origin are possible on request.
Nickel 201 bolting materials Surface Coating:
  • Hot Dipped Galvanizing Alloy 201 Fasteners
  • Phosphate Alloy 201 Fasteners
  • Teflon Alloy 201 Fasteners
  • Ptfe Coated Alloy 201 Fasteners
  • Xylon Alloy 201 Fasteners
  • Zinc Alloy 201 Fasteners
  • Cadmium Alloy 201 Fasteners

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Top Manufacturers of Alloy 201 Fasteners SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
Main Types of Alloy 201 Bolts Nickel 201 Hex Head Bolt, Square Bolt, U Bolt, Eye Bolt, T Bolt, Hex Bolt, Lag Bolt, Counter sunk Bolt etc.
Main Types of Alloy 201 Nut Nickel 201 Hex Head Nut, Square Nut, Lock Nut, Eye Nut, Wing Nut, T Nut, Panel Nut, Coupling Nut, Dome Nut, Acorn Nut etc.
Main Types of Alloy 201 Screw Nickel 201 Hex Head Screw, Socket Head Screw, Socket Set Screw, Anchor Screw, Blind Rivet, Concrete Screw, Threaded Screw, Shoulder Screw, Panel Screw, Machine Screw etc.
Main Types of Alloy 201 Washer Nickel 201 Machine Washers, Star Washers, Lock Washer, Sealing Washer, Split Washer etc.
Nickel 201 Fasteners Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

 

Types of Nickel 201 Fasteners

Types of Nickel 201 Nuts

NICKEL 201 NUTS

Nickel 201 Nuts

Nickel 201 Hexagon nuts
with flange

Nickel 201 Nuts

Nickel 201 Hexagon nuts
with flange

Nickel 201 Nuts

Nickel 201 Hexagon nuts with flange with metric fine thread

Nickel 201 Nuts

Nickel 201 Hexagon nuts with (non-metallic insert) type1

Nickel 201 Nuts

Nickel 201 Hexagon nuts with (all-metal nuts), type 2

Nickel 201 Nuts

Nickel 201 Hexagon nuts, style 1 – Product grades A and B

Nickel 201 Nuts

Nickel 201 Hexagon nuts, style 2 – Product grades A and B

Nickel 201 Nuts

Nickel 201 Hexagon nuts, low type (chamfered)

Nickel 201 Nuts

Nickel 201 Low hex nuts without bevel – Classification B

Nickel 201 Nuts

Nickel 201 Hexagon nuts, style 1, with metric fine thread

Nickel 201 Nuts

Nickel 201 Hexagon nuts, style 2, with metric fine thread

Nickel 201 Nuts

Nickel 201 Low hex nuts (chamfered) with metric fine pitch thread

Nickel 201 Nuts

Nickel 201 Hexagon nuts with flange and (with non-metallic insert)

Nickel 201 Nuts

Nickel 201 Hexagon nuts with metric fine thread

Nickel 201 Nuts

Nickel 201 Hexagon nuts with (all-metal nuts)

Nickel 201 Nuts

Nickel 201 Hexagon nuts with clamping part

Nickel 201 Nuts

Nickel 201 Hexagon nuts with low form, (with non-metallic insert)

Nickel 201 Nuts

Nickel 201 Castle nuts low form (with roll crown)

Nickel 201 Nuts

Nickel 201 crown nuts (without roll crown)

Nickel 201 Nuts

Nickel 201 crown nuts (with roll crown)

Nickel 201 Nuts

Nickel 201 Castle nuts low form (without roll crown)

Nickel 201 Nuts

Nickel 201 Hexagon nuts

Nickel 201 Nuts

Nickel 201 Closed nuts

Nickel 201 Nuts

Nickel 201 Cross hole nuts

Nickel 201 Nuts

Nickel 201 slot nuts

Nickel 201 Nuts

Nickel 201 locknuts

Nickel 201 Nuts

Nickel 201 knurled

Nickel 201 Nuts

Nickel 201 knurled nuts, low form

 

 

Type of Nickel 201 Screws

NICKEL 201 CAP SCREWS

Nickel 201 Screws

ISO 1207 Slotted cheese head screws, Nickel 201

Nickel 201 Screws

ISO 7048 H cylinder head screws with cross recession, shape H, Nickel 201

Nickel 201 Screws

ISO 7048 Z cylinder head screws with cross recession, shape Z, Nickel 201

Nickel 201 Screws

ISO 1580 flat head screw, product grade A, Nickel 201

Nickel 201 Screws

ISO 7045 H flathead screws with Phillips, form H – Product grade A, Nickel 201

Nickel 201 Screws

ISO 7045 Z flathead screws with Phillips, form Z – Product grade A, Nickel 201

Nickel 201 Screws

ISO 21269 Machine screws with hexagon and metric fine thread, Nickel 201

Nickel 201 Screws

ISO 4762 Machine screws with hexagon, Nickel 201

Nickel 201 Screws

ISO 14579 cheese head screws with hexagon socket, Nickel 201

Nickel 201 Screws

ISO 14580 cheese head screws with hexagon socket, low head, Nickel 201

Nickel 201 Screws

ISO 7380-1 screw with flattened Panhead – Part 1: Bolts with flattened Panhead with Allen, Nickel 201

Nickel 201 Screws

ISO 14583 flat-head screws with hexagon socket, Nickel 201

Nickel 201 Screws

CSN 02 1128 capstan screw, Nickel 201

Nickel 201 Screws

DIN 920 flat head screws with small head, Nickel 201

 


NICKEL 201 SCREWS

Nickel 201 Screws

ISO 4026 screws with hexagon socket flat point, Nickel 201

Nickel 201 Screws

ISO 4027 screws with hexagon socket and flattened tip, Nickel 201

Nickel 201 Screws

ISO 4028 screws with hexagon socket and pin, Nickel 201

Nickel 201 Screws

ISO 4029 screws with hexagon socket and serrated, Nickel 201

Nickel 201 Screws

ISO 2342 Slotted set screws with shank, Nickel 201

Nickel 201 Screws

EN 24766 Slotted set screws with flat point, Nickel 201

Nickel 201 Screws

EN 27434 set screws with slot and point, Nickel 201

Nickel 201 Screws

EN 27435 set screws with mortise and tenon, Nickel 201

Nickel 201 Screws

EN 27436 Slotted set screws with cup point, Nickel 201

Nickel 201 Screws

CSN 02 1187 screws with hexagon socket flat point, Nickel 201


NICKEL 201 TAPPING SCREW

Nickel 201 Screws

ISO 1479 C Hexagon head tapping screws, form C
, Nickel 201

Nickel 201 Screws

ISO 1479 F Hexagon head tapping screws, form F , Nickel 201

Nickel 201 Screws

ISO 1481 C Flathead-tapping screws, form C, Nickel 201

Nickel 201 Screws

ISO 1481 F Flathead-tapping screws, form F, Nickel 201

Nickel 201 Screws

ISO 1482 C Senk-tapping screws, form C, Nickel 201

Nickel 201 Screws

ISO 1482 F Senk-tapping screws, form F, Nickel 201

Nickel 201 Screws

ISO 1483 C Slotted-tapping screws, form C, Nickel 201

Nickel 201 Screws

ISO 1483 F Slotted-tapping screws, form F, Nickel 201

Nickel 201 Screws

ISO 7049 CH pan head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7049 CZ pan head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7049 FH pan head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7049 FZ pan head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7050 CH Senk-tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7050 CZ Senk-tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7050 FH Senk-tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7050 FZ Senk-tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7051 CH raised countersunk head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7051 CZ raised countersunk head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7051 FH raised countersunk head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 7051 FZ raised countersunk head tapping screws Phillips, Nickel 201

Nickel 201 Screws

ISO 15480 Hexagon Screws with collar with tapping screw thread, Nickel 201

Nickel 201 Screws

ISO 15481 H Flathead Screws with Phillips, Form H, Nickel 201

Nickel 201 Screws

ISO 15483 H Raised head Screws with Phillips with tapping screw thread, Form H, Nickel 201

Nickel 201 Screws

ISO 15483 Z Raised head Screws with Phillips with tapping screw thread, form Z , Nickel 201

Nickel 201 Screws

ISO 15482 H Senk-drilling screws with Phillips with tapping screw thread, Form H, Nickel 201

Nickel 201 Screws

ISO 15482 Z Senk-drilling screws with Phillips with tapping screw thread, form Z, Nickel 201


NICKEL 201 COUNTERSUNK SCREWS

Nickel 201 Screws

ISO 10642 countersunk screws with hexagon socket, Nickel 201

Nickel 201 Screws

ISO 14584 flat-head screws with hexagon socket, Nickel 201

Nickel 201 Screws

ISO 2009 Slotted countersunk head screws (common head style) product class A, Nickel 201

Nickel 201 Screws

ISO 7046-1 H countersunk screws (common head) with Phillips, form H – Product grade A, Nickel 201

Nickel 201 Screws

ISO 7046-1 Z countersunk screws (common head) with Phillips, form Z – Product grade A, Nickel 201

Nickel 201 Screws

ISO 7046-2 H1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 1, Nickel 201

Nickel 201 Screws

ISO 7046-2 H2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 2, Nickel 201

Nickel 201 Screws

ISO 7046-2 Z1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 1, Nickel 201

Nickel 201 Screws

ISO 7046-2 Z2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 2, Nickel 201

Nickel 201 Screws

ISO 2010 Raised Countersunk head slot (unit head) Classification A, Nickel 201

Nickel 201 Screws

ISO 7047 H Raised Countersunk head (unit head) with Phillips – product class A, Form H, Nickel 201

Nickel 201 Screws

ISO 7047 Z Raised Countersunk head (unit head) with Phillips – product class A, Form Z, Nickel 201

     

NICKEL 201 OTHER SCREWS

Nickel 201 Screws

CSN 02 1121 Nickel 201 Four head bolts with dog point

Nickel 201 Screws

CSN 02 1122 Nickel 201 Square heads bolts with collar and half dog point with rounded end

Nickel 201 Screws

CSN 02 1161 Nickel 201 Screws, tall form

Nickel 201 Screws

CSN 02 1161 Nickel 201 Screws, tall form

Nickel 201 Screws

CSN 02 1162 Nickel 201 Screws, low form

Nickel 201 Screws

CSN 02 1167 Nickel 201 eyebolts

Nickel 201 Screws

CSN 02 1174 Nickel 201 Studs – = 1d

Nickel 201 Screws

CSN 02 1174 Nickel 201 Studs – = 1d

Nickel 201 Screws

CSN 02 1176 Nickel 201 Studs – = 1.25d

Nickel 201 Screws

CSN 02 1176 Nickel 201 Studs – = 1.25d

Nickel 201 Screws

CSN 02 1178 Nickel 201 Studs – = 2d

Nickel 201 Screws

CSN 02 1178 Nickel 201 Studs – = 2d

Nickel 201 Screws

CSN 02 1341 Nickel 201 screws T (M10 – M36x3)

Nickel 201 Screws

CSN 02 1341 Nickel 201 screws T (M42x3 – M100x4)

 

Type of Nickel 201 Bolts

NICKEL 201 HEX BOLTS

NICKEL 200 HEX BOLTS

EN 1665 F Nickel 201 Hexagon bolts with flange, heavy series, Form F

NICKEL 200 HEX BOLTS

ISO 4014 Nickel 201 Hexagon bolts with shaft, product classes A and B

NICKEL 200 HEX BOLTS

ISO 4017 Nickel 201 Hexagon bolts with thread to the head – Product grades A and B

NICKEL 200 HEX BOLTS

ISO 8676 Nickel 201 Hexagon bolts with thread to head, metric fine thread

NICKEL 200 HEX BOLTS

ISO 8765 Nickel 201 Hexagon head bolts with shank, metric fine thread

NICKEL 200 HEX BOLTS

ISO 4018 Nickel 201 Hexagon bolts with thread to head

NICKEL 200 HEX BOLTS

ISO 4016 Nickel 201 Hexagon bolts with shaft, product class C

NICKEL 200 HEX BOLTS

EN 24015 Nickel 201 Hexagon head bolts with shank, relieved shank

NICKEL 200 HEX BOLTS

CSN 02 1104 Nickel 201 Bright hexagon bolts with hole in the head

NICKEL 200 HEX BOLTS

CSN 02 1105 Nickel 201 Bright hexagon bolts with slot

NICKEL 200 HEX BOLTS

CSN 02 1105 B Nickel 201 Bright hexagon bolts with slot

       

Type of Nickel 201 Washers

NICKEL 201 WASHERS

Nickel 201 Washers

ISO 7090 Flat washers normal series, Nickel 201

Nickel 201 Washers

ISO 7089 Flat washers normal series, Nickel 201

Nickel 201 Washers

ISO 7091 Flat washers normal series, Nickel 201

Nickel 201 Washers

ISO 7092 Flat washers small series, Nickel 201

Nickel 201 Washers

ISO 7093-1 Plain washers, large series, Nickel 201

Nickel 201 Washers

ISO 7093-2 Plain washers, large series, Nickel 201

Nickel 201 Washers

ISO 7094 Flat washers, Extra large series, Nickel 201

Nickel 201 Washers

ISO 10673 L Plain washers for bolts, Nickel 201

Nickel 201 Washers

ISO 10673 N Plain washers for bolts, Nickel 201

Nickel 201 Washers

ISO 10673 S Plain washers for bolts, Nickel 201

Nickel 201 Washers

EN 28738 Washers for clevis pins, Nickel 201

Nickel 201 Washers

CSN 02 1740 spring rings with square cross section, Nickel 201

Nickel 201 Washers

CSN 02 1741 spring rings with rectangular cross-section, Nickel 201

   

Types of Nickel 201 metric threaded bolts and machine screws

Hex Head Bolts ISO 4014 (DIN 931), Nickel 201 Hex Head Set screws ISO 4017 (DIN 933), Nickel 201
Hex Head Flange Bolts ISO 1665 (DIN 6921), Nickel 201 Slotted Hex Head Setscrews (DIN 933), Nickel 201
Socket Head Cap Screws ISO 4762 (DIN 912), Nickel 201 Socket Head Cap Screws With Fine Thread ISO 4762 (DIN 912), Nickel 201
Socket Head Cap Screws With Full Thread ISO 4762 (DIN 912), Nickel 201 Unbrako Socket Head Cap Screws ISO 4762, Nickel 201
Torx Head Cap Screws ISO 14579 (sim. DIN 912), Nickel 201 Socket Low Head Cap Screws DIN 7984, Nickel 201
Torx Cap Screws With Low Head ISO 14580 (sim. DIN 7984), Nickel 201 Socket Head Button Screws ISO 7380 part 1, Nickel 201
Unbrako Socket Head Button Screws ISO 7380, Nickel 201 Torx Button Screws, Nickel 201
Pin Torx Button Screws, Nickel 201 Socket Head Button Screws With Flange ISO 7380 part 2, Nickel 201
Slotted Mushroom Head Screws, Nickel 201 Phillips Pan Head Machine Screws ISO 7045 (DIN 7985H), Nickel 201
Pozi Pan Machine Screws ISO 7045 (DIN 7985Z), Nickel 201 Phillips Raised Csk Machine Screws ISO 7047 (DIN 966H), Nickel 201
Pozi Raised Csk Machine Screws, Nickel 201 Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H), Nickel 201
Pozi Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965Z), Nickel 201 Slotted Raised Csk Machine Screws ISO 2010 (DIN 964), Nickel 201
Socket Head Countersunk Screws ISO 10642 (DIN 7991), Nickel 201 Unbrako Socket Head Countersunk Screws ISO 10642, Nickel 201
Slotted Csk Machine Screws ISO 2009 (DIN 963), Nickel 201 Torx Csk Head Screws ISO 14581, Nickel 201
Pin Torx Countersunk Screws, Nickel 201 Slotted Cheese Head Machine Screws ISO 1207 (DIN 84), Nickel 201
Slotted Pan Machine Screws ISO 1580 (DIN 85), Nickel 201 Torx Pan Head Screws ISO 14583, Nickel 201
One Way Security Screws, Nickel 201 Slotted Capstan Screws (DIN 404), Nickel 201
Flat Point Grub Screws ISO 4026 (DIN 913), Nickel 201 Cone Point Grub Screws ISO 4027 (DIN 914), Nickel 201
Cup Point Grub Screws ISO 4029 (DIN 916), Nickel 201 Dog Point Grub Screws ISO 4028 (DIN 915), Nickel 201
Carriage Bolts DIN 603, Nickel 201 Carriage Bolts and Nuts DIN 603 (Bolt) DIN 934 (Nut), Nickel 201
Wing Screws DIN 316 American Form, Nickel 201 Thumb Screws High Type (DIN 464), Nickel 201
Slotted Thumb Screws High Type (DIN 465), Nickel 201 Dowel Screw (Hanger Bolt) with metric and wood thread, and central hex drive, Nickel 201
Threaded Rods DIN 975, Nickel 201 Plastic Head Covers for Hex Screws/Nuts, Nickel 201

Types of Nickel 201 Metric Nuts

Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), Nickel 201 Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), Nickel 201
Full Hex Nuts With Left Hand Thread (DIN 934), Nickel 201 Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), Nickel 201
Half Nuts Fine Pitch ISO 4035, Nickel 201 Half Nuts With Left Hand Thread, Nickel 201
Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), Nickel 201 Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), Nickel 201
Aerotight All Metal Locking Nuts, Nickel 201 Stover Nuts, Nickel 201
Dome Nuts DIN 1587, Nickel 201 Dome Nyloc Nuts DIN 986, Nickel 201
Cap Nuts DIN 917, Nickel 201 Hex Serrated Flange Nuts EN 1661 (DIN 6923), Nickel 201
Hex Plain Flange Nuts, Nickel 201 Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, Nickel 201
Hex Serrated Flange Nuts with Nylon Insert, Nickel 201 Hexagon Nut (Type B) with height 1.5 x thread diameter, Nickel 201
Hexagon Nut with Collar and height 1.5 x thread diameter, Nickel 201 Wing Nuts DIN 315 American Form, Nickel 201
Wing Nuts DIN 315 German Form, Nickel 201 Thumb Nuts High Type DIN 466, Nickel 201
Square Nuts, Nickel 201 Square Thin Nuts, Nickel 201
Sleeve Nuts With Pan Head and Slot, Nickel 201 Studding Connector Nuts, Nickel 201
Castle Nuts DIN 935, Nickel 201 Hexagon Coupler Nut, Nickel 201
Round Coupler Nut, Nickel 201 Counter Nuts DIN 7967, Nickel 201
Hexagon Weld Nuts, Nickel 201 Square Weld Nuts DIN 928, Nickel 201
Cage Nuts - Metric Thread, Nickel 201 Pronged Tee Nuts (4 Prongs), Nickel 201
Slotted Round Nuts for hook spanner DIN 1804, Nickel 201 Plastic Head Covers for Hex Screws/Nuts, Nickel 201

Bolts. A listing of common bolt types and styles.

Unified Inch Coarse and Fine Threads
Nickel 201 Bolt Size Threads per Inch
Frac. [No.] Decimal UNC UNF
1/8 [#6] 0.1380 32 40
5/32 [#8] 0.1640 32 36
3/16 [#10] 0.1900 24 32
1/4 0.2500 20 28
5/16 0.3125 18 24
3/8 0.3750 16 24
7/16 0.4375 14 20
1/2 0.5000 13 20
9/16 0.5625 12 18
5/8 0.6250 11 18
3/4 0.7500 10 16
7/8 0.8750 9 14
1 1.0000 8 12, 14
1 1/8 1.1250 7 12
1 1/4 1.2500 7 12
1 3/8 1.3750 6 12
1 1/2 1.5000 6 12
1 3/4 1.7500 5 -

Nickel 201 Bolts Type: BOLTS, SETS, CUP SQUARE, COACH SCREW, SOCKET CAP, SOCKET COUNTERSUNK, SOCKET BUTTON

Nickel 201 Screws Type SIZE GRADE ASME ISO ASTM
Nickel 201 Socket Head Cap Screw M1.6 to M64 12.9 B18.3.1 M 4762 A574M
Nickel 201 Socket Low Head Cap Screw M4 to M20 10.9
Nickel 201 Socket Head Shoulder Screw M6 to M24 012.9 B18.3.3M
Nickel 201 Countersunk Socket Head Screw M3 to M20 012.9 B18.3.5M 10642 F835M
Nickel 201 Button Head Socket Screw M3 to M12 012.9 B18.3.4M 7380 F835M
Nickel 201 Flange Button Head Socket Screw M3 to M10 012.9 F835M
Nickel 201 Knurled Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Nickel 201 Flat Point Socket Set Screw M6 to M12 45H B18.3.6M 4026 F912M
Nickel 201 Dog Point Socket Set Screw M3 to M20 45H B18.3.6M 4028 F912M
Nickel 201 Cone Point Socket Set Screw M3 to M12 45H B18.3.6M 4027 F912M
Nickel 201 Plain Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Nickel 201 Taper Pressure Plug M8 to M22 -

Nickel 201 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Nickel 201 Hex Head Bolt / Screw M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

Nickel 201 Nuts Type SIZE PROPERTY CLASS STANDARD
Nickel 201 Hex Nut M6 to M42 10 ISO 4032
Nickel 201 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
Nickel 201 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
Nickel 201 Hex Weld Nut M6 to M12 8 DIN 929

Nickel 201 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, Nickel 201 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, Nickel 201 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, Nickel 201 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, Nickel 201 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.

Hexagon Bolts / Set Screws Stud Bolts Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screw and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screw Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

 

Nickel 201 Fasteners Composition

Chemical Composition of Nickel 201 Fasteners
Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max .35 max 0.1 max 0.01 max 0.25 max 0.4 max 99.0 min

Mechanical Properties of Nickel 201 Fasteners
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Physical Properties of Nickel 201 Fasteners
Element Density Melting Point
Nickel 201 8.9 g/cm3 1446 °C (2635 °F)

 

 Alloy 201 Nuts and Bolts Price List

Nickel 201 cotter pin bolt manufacturer US $0.10-$5.00 / Piece
Din975 High quality M8 Inconel Alloy 201 bolt price per piece US $0.50-$2.00 / Piece
Nickel 201 hex bolt and nut US $0.01-$0.50 / Piece
NICKEL 201 / 2.4068/ N02201 HEX CAP SCREW / BOLT US $0.10-$100.00 / Piece
Din975 High quality M8 Nickel 201 bolt price per piece US $0.50-$2.00 / Piece
High quality Nickel 201 price stud bolts with hex nut US $0.01-$2.00 / Piece
Nickel 201 UNS N02201 2.4068 Nickel 201 stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Cheap nickel 200 hex bolt and nut US $0.04-$0.60 / Piece
High quality M8 Nickel 201 bolt price per piece US $0.50-$2.00 / Piece
Nickel 201 UNS N02201 2.4068 Nickel 201 12 Point Flange Bolt US $3.20-$3.60 / Pieces
China supplier best price Iso 4017 Nickel 201 Hex Bolt And Nut US $0.05-$1.00 / Piece
Nickel 201 UNS N02201 DIN/EN 2.4068 12 point bolt flange shoulder bolt U bolt eye bolt US $10.50-$12.00 / Pieces
M8~M72 Nickel 201 alloy steel bolt price per piece US $0.20-$2.00 / Piece
UNS N02201 Nickel 201 2.4068 Nickel 201 Big NUT Heavy hex Nut US $14.80-$15.60 / Pieces
NICKEL 201 / 2.4068 / UNS N02201 hex nut 3/8-16 5/16-18 US $0.20-$0.50 / Pieces