Nickel 200 Bar

Nickel Fasteners manufacturers

ASTM B160 UNS N02200 Fastener, Nickel 200 stud Bolts, Nickel Alloys Screws and Nickel Threaded Rod suppliers in Mumbai

Best Price of Nickel Cap Screws, Nickel 200 Carriage Bolts, Nickel Elevator Bolts, Nickel Flange Bolts, Nickel Heavy Hex Head Bolts in India

Special offer on nickel 200 bolt s10, and Alloy 200 studs. Check sizes of ASTM B160 Nickel Step Bolts

ASME SB160 Nickel Structural Bolts, ASTM B160 UNS N02200 U-Bolts, Nickel J-Bolts exporter in India

Nickel 200 Fasteners

Nickel 200 Fasteners

Nickel 200 Nuts

Nickel 200 Nuts

Nickel 200 Bolts

Nickel 200 Bolts

Nickel 200 Screws

Nickel 200 Screws

Nickel 200 Threaded Rod

Nickel 200 Threaded Rod

Nickel 200 Studs

Nickel 200 Studs

 

Nickel 200 has a high electrical conductivity, as well as a high thermal conductivity. At different concentrations and different temperatures, Nickel Fasteners offers very good resistance to caustic alkalis. Nickel 200 has low vapor pressure, as well as low gas content. Nickel 200 fasteners composition is that of Nickel, Ni ≥ 99. Iron, Fe ≤ 0.40. Manganese, Mn ≤ 0.35. Silicon, Si ≤ 0.35. Copper, Cu ≤ 0.25. Carbon, C≤ 0.15 and Sulfur, S ≤ 0.010. The Density of Nickel 200 is 0.321 lb/in3 (8.89 g/cm3). Nickel 200 Bolt Melting Point is 2615-2635 °F (1435-1446 °C). Nickel 200 has an Elongation at break of 45%. Nickel 200 has a Yield Strength of 21500 psi (148 MPa). Nickel 200 has a Tensile Strength of 67000 psi (462 MPa). Nickel 200 Nut is ferromagnetic and also over a wide temperature range, it displays mechanical properties that are very ductile. Because of these characteristics, Nickel 200 is used in a wide range of applications such as food processing equipment, chemical and petrochemical processing, aerospace and missile components and marine and water treatment. Nickel 200 has an Electrical Resistivity of 0.096 µΩ/m at 20 °C (58 Ohm-circ mil/ft at 70 °F). Nickel 200 Threaded Rod has magnetostrictive and magnetic properties. Due to the corrosion resistance of Nickel 200 Hex Head Bolt, it is extremely useful in the maintenance of the purity of products in the handling of foods, caustic alkalies and synthetic fibers.

Nickel 200 Fasteners Specifications

NICKEL 200 FASTENERS - SCREWS, BOLTS AND NUTS FOR TOUGHEST USE

Nickel 200 Fasteners Material Nickel 200 Fasteners
Nickel 200 Fasteners/ Bolts Size M 02 to M 160
Length 3 mm to 200 mm
Nickel 200 Bolts, Studs Threads: METRIC, BSW, BSF, UNC, UNF or as required
Alloy 200 Fasteners Standard: DIN, ISO, JIS, GB, IS, BS, ASTM
ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Alloy 200 Stud Bolt length are defined in ASME B16.5 standard
  • Alloy 200 Hex nuts are defined in ASME B18.2.2
  • ASME B18.5

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

SCOPE OF MANUFACTURE
  • Hot Forged Nickel 200 Fasteners, Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Nickel 200 Fasteners, Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Nickel 200 Fasteners In Form of:

Hex, Square, Round, Threading as per Gauge Etc.

Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Nickel 200 bolting Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Nickel 200 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100,
machining and CNC for Customized connecting element
Nickel 200 Fasteners Origin and service-region: European
Origin of Nickel 200 Fasteners are Western European. However projects with eastern origin are possible on request.
Nickel 200 bolting materials Surface Coating:
  • Hot Dipped Galvanizing Alloy 200 Fasteners
  • Phosphate Alloy 200 Fasteners
  • Teflon Alloy 200 Fasteners
  • Ptfe Coated Alloy 200 Fasteners
  • Xylon Alloy 200 Fasteners
  • Zinc Alloy 200 Fasteners
  • Cadmium Alloy 200 Fasteners

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Top Manufacturers of Alloy 200 Fasteners SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
Main Types of Alloy 200 Bolts Nickel 200 Hex Head Bolt, Square Bolt, U Bolt, Eye Bolt, T Bolt, Hex Bolt, Lag Bolt, Counter sunk Bolt etc.
Main Types of Alloy 200 Nut Nickel 200 Hex Head Nut, Square Nut, Lock Nut, Eye Nut, Wing Nut, T Nut, Panel Nut, Coupling Nut, Dome Nut, Acorn Nut etc.
Main Types of Alloy 200 Screw Nickel 200 Hex Head Screw, Socket Head Screw, Socket Set Screw, Anchor Screw, Blind Rivet, Concrete Screw, Threaded Screw, Shoulder Screw, Panel Screw, Machine Screw etc.
Main Types of Alloy 200 Washer Nickel 200 Machine Washers, Star Washers, Lock Washer, Sealing Washer, Split Washer etc.
Nickel 200 Fasteners Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

 

Types of Nickel 200 Fasteners

Types of Nickel 200 Nuts

NICKEL 200 NUTS

Nickel 200 Nuts

Nickel 200 Hexagon nuts
with flange

Nickel 200 Nuts

Nickel 200 Hexagon nuts
with flange

Nickel 200 Nuts

Nickel 200 Hexagon nuts with flange with metric fine thread

Nickel 200 Nuts

Nickel 200 Hexagon nuts with (non-metallic insert) type1

Nickel 200 Nuts

Nickel 200 Hexagon nuts with (all-metal nuts), type 2

Nickel 200 Nuts

Nickel 200 Hexagon nuts, style 1 – Product grades A and B

Nickel 200 Nuts

Nickel 200 Hexagon nuts, style 2 – Product grades A and B

Nickel 200 Nuts

Nickel 200 Hexagon nuts, low type (chamfered)

Nickel 200 Nuts

Nickel 200 Low hex nuts without bevel – Classification B

Nickel 200 Nuts

Nickel 200 Hexagon nuts, style 1, with metric fine thread

Nickel 200 Nuts

Nickel 200 Hexagon nuts, style 2, with metric fine thread

Nickel 200 Nuts

Nickel 200 Low hex nuts (chamfered) with metric fine pitch thread

Nickel 200 Nuts

Nickel 200 Hexagon nuts with flange and (with non-metallic insert)

Nickel 200 Nuts

Nickel 200 Hexagon nuts with metric fine thread

Nickel 200 Nuts

Nickel 200 Hexagon nuts with (all-metal nuts)

Nickel 200 Nuts

Nickel 200 Hexagon nuts with clamping part

Nickel 200 Nuts

Nickel 200 Hexagon nuts with low form, (with non-metallic insert)

Nickel 200 Nuts

Nickel 200 Castle nuts low form (with roll crown)

Nickel 200 Nuts

Nickel 200 crown nuts (without roll crown)

Nickel 200 Nuts

Nickel 200 crown nuts (with roll crown)

Nickel 200 Nuts

Nickel 200 Castle nuts low form (without roll crown)

Nickel 200 Nuts

Nickel 200 Hexagon nuts

Nickel 200 Nuts

Nickel 200 Closed nuts

Nickel 200 Nuts

Nickel 200 Cross hole nuts

Nickel 200 Nuts

Nickel 200 slot nuts

Nickel 200 Nuts

Nickel 200 locknuts

Nickel 200 Nuts

Nickel 200 knurled

Nickel 200 Nuts

Nickel 200 knurled nuts, low form

 

 

Type of Nickel 200 Screws

NICKEL 200 CAP SCREWS

Nickel 200 Screws

ISO 1207 Slotted cheese head screws, Nickel 200

Nickel 200 Screws

ISO 7048 H cylinder head screws with cross recession, shape H, Nickel 200

Nickel 200 Screws

ISO 7048 Z cylinder head screws with cross recession, shape Z, Nickel 200

Nickel 200 Screws

ISO 1580 flat head screw, product grade A, Nickel 200

Nickel 200 Screws

ISO 7045 H flathead screws with Phillips, form H – Product grade A, Nickel 200

Nickel 200 Screws

ISO 7045 Z flathead screws with Phillips, form Z – Product grade A, Nickel 200

Nickel 200 Screws

ISO 21269 Machine screws with hexagon and metric fine thread, Nickel 200

Nickel 200 Screws

ISO 4762 Machine screws with hexagon, Nickel 200

Nickel 200 Screws

ISO 14579 cheese head screws with hexagon socket, Nickel 200

Nickel 200 Screws

ISO 14580 cheese head screws with hexagon socket, low head, Nickel 200

Nickel 200 Screws

ISO 7380-1 screw with flattened Panhead – Part 1: Bolts with flattened Panhead with Allen, Nickel 200

Nickel 200 Screws

ISO 14583 flat-head screws with hexagon socket, Nickel 200

Nickel 200 Screws

CSN 02 1128 capstan screw, Nickel 200

Nickel 200 Screws

DIN 920 flat head screws with small head, Nickel 200

 


NICKEL 200 SCREWS

Nickel 200 Screws

ISO 4026 screws with hexagon socket flat point, Nickel 200

Nickel 200 Screws

ISO 4027 screws with hexagon socket and flattened tip, Nickel 200

Nickel 200 Screws

ISO 4028 screws with hexagon socket and pin, Nickel 200

Nickel 200 Screws

ISO 4029 screws with hexagon socket and serrated, Nickel 200

Nickel 200 Screws

ISO 2342 Slotted set screws with shank, Nickel 200

Nickel 200 Screws

EN 24766 Slotted set screws with flat point, Nickel 200

Nickel 200 Screws

EN 27434 set screws with slot and point, Nickel 200

Nickel 200 Screws

EN 27435 set screws with mortise and tenon, Nickel 200

Nickel 200 Screws

EN 27436 Slotted set screws with cup point, Nickel 200

Nickel 200 Screws

CSN 02 1187 screws with hexagon socket flat point, Nickel 200


NICKEL 200 TAPPING SCREW

Nickel 200 Screws

ISO 1479 C Hexagon head tapping screws, form C
, Nickel 200

Nickel 200 Screws

ISO 1479 F Hexagon head tapping screws, form F , Nickel 200

Nickel 200 Screws

ISO 1481 C Flathead-tapping screws, form C, Nickel 200

Nickel 200 Screws

ISO 1481 F Flathead-tapping screws, form F, Nickel 200

Nickel 200 Screws

ISO 1482 C Senk-tapping screws, form C, Nickel 200

Nickel 200 Screws

ISO 1482 F Senk-tapping screws, form F, Nickel 200

Nickel 200 Screws

ISO 1483 C Slotted-tapping screws, form C, Nickel 200

Nickel 200 Screws

ISO 1483 F Slotted-tapping screws, form F, Nickel 200

Nickel 200 Screws

ISO 7049 CH pan head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7049 CZ pan head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7049 FH pan head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7049 FZ pan head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7050 CH Senk-tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7050 CZ Senk-tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7050 FH Senk-tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7050 FZ Senk-tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7051 CH raised countersunk head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7051 CZ raised countersunk head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7051 FH raised countersunk head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 7051 FZ raised countersunk head tapping screws Phillips, Nickel 200

Nickel 200 Screws

ISO 15480 Hexagon Screws with collar with tapping screw thread, Nickel 200

Nickel 200 Screws

ISO 15481 H Flathead Screws with Phillips, Form H, Nickel 200

Nickel 200 Screws

ISO 15483 H Raised head Screws with Phillips with tapping screw thread, Form H, Nickel 200

Nickel 200 Screws

ISO 15483 Z Raised head Screws with Phillips with tapping screw thread, form Z , Nickel 200

Nickel 200 Screws

ISO 15482 H Senk-drilling screws with Phillips with tapping screw thread, Form H, Nickel 200

Nickel 200 Screws

ISO 15482 Z Senk-drilling screws with Phillips with tapping screw thread, form Z, Nickel 200


NICKEL 200 COUNTERSUNK SCREWS

Nickel 200 Screws

ISO 10642 countersunk screws with hexagon socket, Nickel 200

Nickel 200 Screws

ISO 14584 flat-head screws with hexagon socket, Nickel 200

Nickel 200 Screws

ISO 2009 Slotted countersunk head screws (common head style) product class A, Nickel 200

Nickel 200 Screws

ISO 7046-1 H countersunk screws (common head) with Phillips, form H – Product grade A, Nickel 200

Nickel 200 Screws

ISO 7046-1 Z countersunk screws (common head) with Phillips, form Z – Product grade A, Nickel 200

Nickel 200 Screws

ISO 7046-2 H1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 1, Nickel 200

Nickel 200 Screws

ISO 7046-2 H2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 2, Nickel 200

Nickel 200 Screws

ISO 7046-2 Z1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 1, Nickel 200

Nickel 200 Screws

ISO 7046-2 Z2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 2, Nickel 200

Nickel 200 Screws

ISO 2010 Raised Countersunk head slot (unit head) Classification A, Nickel 200

Nickel 200 Screws

ISO 7047 H Raised Countersunk head (unit head) with Phillips – product class A, Form H, Nickel 200

Nickel 200 Screws

ISO 7047 Z Raised Countersunk head (unit head) with Phillips – product class A, Form Z, Nickel 200

     

NICKEL 200 OTHER SCREWS

Nickel 200 Screws

CSN 02 1121 Nickel 200 Four head bolts with dog point

Nickel 200 Screws

CSN 02 1122 Nickel 200 Square heads bolts with collar and half dog point with rounded end

Nickel 200 Screws

CSN 02 1161 Nickel 200 Screws, tall form

Nickel 200 Screws

CSN 02 1161 Nickel 200 Screws, tall form

Nickel 200 Screws

CSN 02 1162 Nickel 200 Screws, low form

Nickel 200 Screws

CSN 02 1167 Nickel 200 eyebolts

Nickel 200 Screws

CSN 02 1174 Nickel 200 Studs – = 1d

Nickel 200 Screws

CSN 02 1174 Nickel 200 Studs – = 1d

Nickel 200 Screws

CSN 02 1176 Nickel 200 Studs – = 1.25d

Nickel 200 Screws

CSN 02 1176 Nickel 200 Studs – = 1.25d

Nickel 200 Screws

CSN 02 1178 Nickel 200 Studs – = 2d

Nickel 200 Screws

CSN 02 1178 Nickel 200 Studs – = 2d

Nickel 200 Screws

CSN 02 1341 Nickel 200 screws T (M10 – M36x3)

Nickel 200 Screws

CSN 02 1341 Nickel 200 screws T (M42x3 – M100x4)

 

Type of Nickel 200 Bolts

NICKEL 200 HEX BOLTS

NICKEL 200 HEX BOLTS

EN 1665 F Nickel 200 Hexagon bolts with flange, heavy series, Form F

NICKEL 200 HEX BOLTS

ISO 4014 Nickel 200 Hexagon bolts with shaft, product classes A and B

NICKEL 200 HEX BOLTS

ISO 4017 Nickel 200 Hexagon bolts with thread to the head – Product grades A and B

NICKEL 200 HEX BOLTS

ISO 8676 Nickel 200 Hexagon bolts with thread to head, metric fine thread

NICKEL 200 HEX BOLTS

ISO 8765 Nickel 200 Hexagon head bolts with shank, metric fine thread

NICKEL 200 HEX BOLTS

ISO 4018 Nickel 200 Hexagon bolts with thread to head

NICKEL 200 HEX BOLTS

ISO 4016 Nickel 200 Hexagon bolts with shaft, product class C

NICKEL 200 HEX BOLTS

EN 24015 Nickel 200 Hexagon head bolts with shank, relieved shank

NICKEL 200 HEX BOLTS

CSN 02 1104 Nickel 200 Bright hexagon bolts with hole in the head

NICKEL 200 HEX BOLTS

CSN 02 1105 Nickel 200 Bright hexagon bolts with slot

NICKEL 200 HEX BOLTS

CSN 02 1105 B Nickel 200 Bright hexagon bolts with slot

       

Type of Nickel 200 Washers

NICKEL 200 WASHERS

Nickel 200 Washers

ISO 7090 Flat washers normal series, Nickel 200

Nickel 200 Washers

ISO 7089 Flat washers normal series, Nickel 200

Nickel 200 Washers

ISO 7091 Flat washers normal series, Nickel 200

Nickel 200 Washers

ISO 7092 Flat washers small series, Nickel 200

Nickel 200 Washers

ISO 7093-1 Plain washers, large series, Nickel 200

Nickel 200 Washers

ISO 7093-2 Plain washers, large series, Nickel 200

Nickel 200 Washers

ISO 7094 Flat washers, Extra large series, Nickel 200

Nickel 200 Washers

ISO 10673 L Plain washers for bolts, Nickel 200

Nickel 200 Washers

ISO 10673 N Plain washers for bolts, Nickel 200

Nickel 200 Washers

ISO 10673 S Plain washers for bolts, Nickel 200

Nickel 200 Washers

EN 28738 Washers for clevis pins, Nickel 200

Nickel 200 Washers

CSN 02 1740 spring rings with square cross section, Nickel 200

Nickel 200 Washers

CSN 02 1741 spring rings with rectangular cross-section, Nickel 200

   

Types of Nickel 200 metric threaded bolts and machine screws

Hex Head Bolts ISO 4014 (DIN 931), Nickel 200 Hex Head Set screws ISO 4017 (DIN 933), Nickel 200
Hex Head Flange Bolts ISO 1665 (DIN 6921), Nickel 200 Slotted Hex Head Setscrews (DIN 933), Nickel 200
Socket Head Cap Screws ISO 4762 (DIN 912), Nickel 200 Socket Head Cap Screws With Fine Thread ISO 4762 (DIN 912), Nickel 200
Socket Head Cap Screws With Full Thread ISO 4762 (DIN 912), Nickel 200 Unbrako Socket Head Cap Screws ISO 4762, Nickel 200
Torx Head Cap Screws ISO 14579 (sim. DIN 912), Nickel 200 Socket Low Head Cap Screws DIN 7984, Nickel 200
Torx Cap Screws With Low Head ISO 14580 (sim. DIN 7984), Nickel 200 Socket Head Button Screws ISO 7380 part 1, Nickel 200
Unbrako Socket Head Button Screws ISO 7380, Nickel 200 Torx Button Screws, Nickel 200
Pin Torx Button Screws, Nickel 200 Socket Head Button Screws With Flange ISO 7380 part 2, Nickel 200
Slotted Mushroom Head Screws, Nickel 200 Phillips Pan Head Machine Screws ISO 7045 (DIN 7985H), Nickel 200
Pozi Pan Machine Screws ISO 7045 (DIN 7985Z), Nickel 200 Phillips Raised Csk Machine Screws ISO 7047 (DIN 966H), Nickel 200
Pozi Raised Csk Machine Screws, Nickel 200 Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H), Nickel 200
Pozi Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965Z), Nickel 200 Slotted Raised Csk Machine Screws ISO 2010 (DIN 964), Nickel 200
Socket Head Countersunk Screws ISO 10642 (DIN 7991), Nickel 200 Unbrako Socket Head Countersunk Screws ISO 10642, Nickel 200
Slotted Csk Machine Screws ISO 2009 (DIN 963), Nickel 200 Torx Csk Head Screws ISO 14581, Nickel 200
Pin Torx Countersunk Screws, Nickel 200 Slotted Cheese Head Machine Screws ISO 1207 (DIN 84), Nickel 200
Slotted Pan Machine Screws ISO 1580 (DIN 85), Nickel 200 Torx Pan Head Screws ISO 14583, Nickel 200
One Way Security Screws, Nickel 200 Slotted Capstan Screws (DIN 404), Nickel 200
Flat Point Grub Screws ISO 4026 (DIN 913), Nickel 200 Cone Point Grub Screws ISO 4027 (DIN 914), Nickel 200
Cup Point Grub Screws ISO 4029 (DIN 916), Nickel 200 Dog Point Grub Screws ISO 4028 (DIN 915), Nickel 200
Carriage Bolts DIN 603, Nickel 200 Carriage Bolts and Nuts DIN 603 (Bolt) DIN 934 (Nut), Nickel 200
Wing Screws DIN 316 American Form, Nickel 200 Thumb Screws High Type (DIN 464), Nickel 200
Slotted Thumb Screws High Type (DIN 465), Nickel 200 Dowel Screw (Hanger Bolt) with metric and wood thread, and central hex drive, Nickel 200
Threaded Rods DIN 975, Nickel 200 Plastic Head Covers for Hex Screws/Nuts, Nickel 200

Types of Nickel 200 Metric Nuts

Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), Nickel 200 Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), Nickel 200
Full Hex Nuts With Left Hand Thread (DIN 934), Nickel 200 Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), Nickel 200
Half Nuts Fine Pitch ISO 4035, Nickel 200 Half Nuts With Left Hand Thread, Nickel 200
Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), Nickel 200 Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), Nickel 200
Aerotight All Metal Locking Nuts, Nickel 200 Stover Nuts, Nickel 200
Dome Nuts DIN 1587, Nickel 200 Dome Nyloc Nuts DIN 986, Nickel 200
Cap Nuts DIN 917, Nickel 200 Hex Serrated Flange Nuts EN 1661 (DIN 6923), Nickel 200
Hex Plain Flange Nuts, Nickel 200 Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, Nickel 200
Hex Serrated Flange Nuts with Nylon Insert, Nickel 200 Hexagon Nut (Type B) with height 1.5 x thread diameter, Nickel 200
Hexagon Nut with Collar and height 1.5 x thread diameter, Nickel 200 Wing Nuts DIN 315 American Form, Nickel 200
Wing Nuts DIN 315 German Form, Nickel 200 Thumb Nuts High Type DIN 466, Nickel 200
Square Nuts, Nickel 200 Square Thin Nuts, Nickel 200
Sleeve Nuts With Pan Head and Slot, Nickel 200 Studding Connector Nuts, Nickel 200
Castle Nuts DIN 935, Nickel 200 Hexagon Coupler Nut, Nickel 200
Round Coupler Nut, Nickel 200 Counter Nuts DIN 7967, Nickel 200
Hexagon Weld Nuts, Nickel 200 Square Weld Nuts DIN 928, Nickel 200
Cage Nuts - Metric Thread, Nickel 200 Pronged Tee Nuts (4 Prongs), Nickel 200
Slotted Round Nuts for hook spanner DIN 1804, Nickel 200 Plastic Head Covers for Hex Screws/Nuts, Nickel 200

Bolts. A listing of common bolt types and styles.

Unified Inch Coarse and Fine Threads
Nickel 200 Bolt Size Threads per Inch
Frac. [No.] Decimal UNC UNF
1/8 [#6] 0.1380 32 40
5/32 [#8] 0.1640 32 36
3/16 [#10] 0.1900 24 32
1/4 0.2500 20 28
5/16 0.3125 18 24
3/8 0.3750 16 24
7/16 0.4375 14 20
1/2 0.5000 13 20
9/16 0.5625 12 18
5/8 0.6250 11 18
3/4 0.7500 10 16
7/8 0.8750 9 14
1 1.0000 8 12, 14
1 1/8 1.1250 7 12
1 1/4 1.2500 7 12
1 3/8 1.3750 6 12
1 1/2 1.5000 6 12
1 3/4 1.7500 5 -

Nickel 200 Bolts Type: BOLTS, SETS, CUP SQUARE, COACH SCREW, SOCKET CAP, SOCKET COUNTERSUNK, SOCKET BUTTON

Nickel 200 Screws Type SIZE GRADE ASME ISO ASTM
Nickel 200 Socket Head Cap Screw M1.6 to M64 12.9 B18.3.1 M 4762 A574M
Nickel 200 Socket Low Head Cap Screw M4 to M20 10.9
Nickel 200 Socket Head Shoulder Screw M6 to M24 012.9 B18.3.3M
Nickel 200 Countersunk Socket Head Screw M3 to M20 012.9 B18.3.5M 10642 F835M
Nickel 200 Button Head Socket Screw M3 to M12 012.9 B18.3.4M 7380 F835M
Nickel 200 Flange Button Head Socket Screw M3 to M10 012.9 F835M
Nickel 200 Knurled Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Nickel 200 Flat Point Socket Set Screw M6 to M12 45H B18.3.6M 4026 F912M
Nickel 200 Dog Point Socket Set Screw M3 to M20 45H B18.3.6M 4028 F912M
Nickel 200 Cone Point Socket Set Screw M3 to M12 45H B18.3.6M 4027 F912M
Nickel 200 Plain Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
Nickel 200 Taper Pressure Plug M8 to M22 -

Nickel 200 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Nickel 200 Hex Head Bolt / Screw M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

Nickel 200 Nuts Type SIZE PROPERTY CLASS STANDARD
Nickel 200 Hex Nut M6 to M42 10 ISO 4032
Nickel 200 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
Nickel 200 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
Nickel 200 Hex Weld Nut M6 to M12 8 DIN 929

Nickel 200 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, Nickel 200 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, Nickel 200 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, Nickel 200 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, Nickel 200 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.

Hexagon Bolts / Set Screws Stud Bolts Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screw and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screw Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

 

Nickel 200 Fasteners Composition

Chemical Composition of Nickel 200 Fasteners
ELEMENT CONTENT (%)
Nickel, Ni ≥ 99
Iron, Fe ≤ 0.40
Manganese, Mn ≤ 0.35
Silicon, Si ≤ 0.35
Copper, Cu ≤ 0.25
Carbon, C ≤ 0.15
Sulfur, S ≤ 0.010

Mechanical Properties of Nickel 200 Fasteners
PROPERTIES METRIC IMPERIAL
Tensile strength (annealed) 462 MPa 67000 psi
Yield strength (annealed) 148 MPa 21500 psi
Elongation at break (annealed prior to test) 45% 45%

Physical Properties of Nickel 200 Fasteners
PROPERTIES METRIC IMPERIAL
Density 8.89 g/cm3 0.321 lb/in3
Melting point 1435-1446°C 2615-2635°F

 

 Alloy 200 Nuts and Bolts Price List

Nickel 200 cotter pin bolt manufacturer US $0.10-$5.00 / Piece
Din975 High quality M8 Inconel Alloy 200 bolt price per piece US $0.50-$2.00 / Piece
Nickel 200 hex bolt and nut US $0.01-$0.50 / Piece
NICKEL 200 / 2.4006/ N02200 HEX CAP SCREW / BOLT US $0.10-$100.00 / Piece
Din975 High quality M8 Nickel 200 bolt price per piece US $0.50-$2.00 / Piece
High quality Nickel 200 price stud bolts with hex nut US $0.01-$2.00 / Piece
Nickel 200 UNS N02200 2.4006 Nickel 200 stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Cheap nickel 200 hex bolt and nut US $0.04-$0.60 / Piece
High quality M8 Nickel 200 bolt price per piece US $0.50-$2.00 / Piece
Nickel 200 UNS N02200 2.4006 Nickel 200 12 Point Flange Bolt US $3.20-$3.60 / Pieces
China supplier best price Iso 4017 Nickel 200 Hex Bolt And Nut US $0.05-$1.00 / Piece
Nickel 200 UNS N02200 DIN/EN 2.4006 12 point bolt flange shoulder bolt U bolt eye bolt US $10.50-$12.00 / Pieces
M8~M72 Nickel 200 alloy steel bolt price per piece US $0.20-$2.00 / Piece
UNS N02200 Nickel 200 2.4006 Nickel 200 Big NUT Heavy hex Nut US $14.80-$15.60 / Pieces
NICKEL 200 / 2.4006 / UNS N02200 hex nut 3/8-16 5/16-18 US $0.20-$0.50 / Pieces