Table Of Content
| Titanium grade Pipe | Description |
|---|---|
| Pipe Ti Grade 1 (CP Ti) | Relatively low-strength and high-ductility pure titanium (Cp). |
| Pipe Ti Grade 2 (CP Ti) | Medium-strength pure titanium (Cp). |
| Pipe Ti Grade 3 (CP Ti) | High strength pure titanium (Cp). |
| Pipe Ti Grade 5 | |
| Pipe Ti Grade 7 | Medium-strength Pd-alloyed titanium for enhanced corrosion properties. |
| Pipe Ti Grade 9 | High-strength titanium alloyed with 3% Al and 2.5% V. |
| Pipe Ti Grade 11 | Low-strength titanium plus 0.12-0.25% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 12 | High-strength titanium alloy plus 0.3% Mo and 0.8% Ni for enhanced corrosion properties. |
| Pipe Ti Grade 16 | Medium-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 17 | Low-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 26 | Medium-strength titanium plus 0.08-0.14% Ru for enhanced corrosion properties. |
| Pipe Ti Grade 28 | High-strength titanium alloy plus 3% Al, 2.5% V and 0.08%-0.14% Ru for enhanced corrosion properties. |
Titanium and Alloys : Gr1(TA1), Gr2(TA2), Gr3(TA3), Gr4(TA4),Gr5(TC4), Gr6(TA7), Gr7(TA9), Gr9(TA18), Gr11(TA9-1), Gr12(TA10), Gr23(TC4 ELI), TA19 (Ti-6Al-2Sn-4Zr-2Mo-0.1Si), TB5(Ti-15V-3Cr-3Sn), TB6(Ti-10V-2Fe-3Al), Ti5553 (TiAl5V5Mo5Cr3), TC16, TC16, TC18, TC19, TC21, TC20 (Ti-6Al-7Nb), TC26 (Ti-13Nb-13Zr), Ti-Nb (titanium niobium alloy)
Titanium is more then 46% lighter than steel. For comparative analysis, aluminum is approximately 0.12 lbs/cu.in, Steel is approximately 0.29 lbs/cu.in, and Titanium is approximately 0.16 lbs/cu.in.
| Titanium Price per kg in India | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
|---|---|---|---|---|
| Titanium Price per kg in India | Indian | Rs 5400/- | $80 | €68 |
| Titanium Price per kg in UK / Europe | European | Rs 6800/- | $101 | €87 |
| Titanium Price per kg in USA | USA | Rs 7400/- | $110 | €94 |
| Titanium Price per kg in Japan | Japanese | Rs 6100/- | $91 | €78 |
| AMS-T-9046 (Issued 1999) | |
|---|---|
| Commercially Pure Titanium | |
| (CP) CODE | Yield Strength (min. ksi) |
| CP-1 | (70 KSI-YS) |
| CP-2 | (55 KSI-YS) |
| CP-3 | (40 KSI-YS) |
| CP-4 | (30 KSI-YS) |
| Alpha Titanium Alloys (A) | |
| CODE | Composition |
| A-1 | 5AL-2.5Sn |
| A-2 | 5AL-2.5Sn (ELI) |
| A-3 | 6AL-2Cb-1Ta-0.8Mo |
| A-4 | 8AL-1Mo-1V |
| Alpha-Beta Titanium Alloy | |
| (AB) CODE | Composition |
| AB-1 | 6AL-4V |
| AB-2 | 6AL-4V (ELI) |
| AB-3 | 6AL-6V-2Sn |
| AB-4 | 6AL-2Sn-4Zr-2Mo |
| AB-5 | 3.AL-2.5V |
| AB-6 | 8Mn |
| Beta Titanium Alloys (B) | |
| CODE | Composition |
| B-1 | 13V-11Cr-3AL |
| B-2 | 11.5Mo-6Zr-4.5Sn |
| B-3 | 3AL-8V-6Cr-4Mo-4Zr |
| B-4 | 8Mo-8V-2Fe-3AL |
| Grade | Description |
| Titanium Grade 1 | Unalloyed titanium, low oxygen, low strength |
| Titanium Grade 2 | Unalloyed titanium, standard oxygen, medium strength |
| Titanium Grade 3 | Unalloyed titanium, medium oxygen, high strength |
| Titanium Grade 4 | Unalloyed titanium, high oxygen, extra high strength |
| Titanium Grade 5 | Titanium alloy (6% aluminum, 4% vanadium) |
| Titanium Grade 7 | Unalloyed titanium plus 0.12% to 0.25% palladium, standard oxygen, medium strength |
| Titanium Grade 9 | Titanium alloy (3% aluminum, 2.5% vanadium), high strength. Mainly aerospace applications |
| Titanium Grade 11 | Unalloyed titanium plus 0.12% to 0.25% palladium, low oxygen, low strength |
| Titanium Grade 12 | Titanium alloy (0.3% molybdenum, 0.8% nickel), high strength |
| Titanium Grade 13 | Titanium alloy (0.5% nickel, 0.05% ruthenium), low oxygen |
| Titanium Grade 14 | Titanium alloy (0.5% nickel, 0.05% ruthenium), standard oxygen |
| Titanium Grade 15 | Titanium alloy (0.5% nickel, 0.05% ruthenium), medium oxygen |
| Titanium Grade 16 | Unalloyed titanium plus 0.04% to 0.08% palladium, standard oxygen, medium strength |
| Titanium Grade 17 | Unalloyed titanium plus 0.04% to 0.08% palladium, low oxygen, low strength |
| Titanium Grade 18 | Titanium alloy (3% aluminum, 2.5% vanadium plus 0.04% to 0.08% palladium), |
| Titanium Grade 19 | Titanium alloy (3% aluminum, 8% vanadium, 6% chromium, 4% zirconium, 4% molybdenum) |
| Titanium Grade 20 | Titanium alloy (3% aluminum, 8% vanadium, 6% chromium, 4% zirconium, 4% molybdenum) plus 0.04% to 0.08% palladium |
| Titanium Grade 21 | Titanium alloy (15% molybdenum, 3% aluminum, 2.7% niobium, 0.25% silicon) |
| Titanium Grade 23 | Titanium alloy (6% aluminum, 4% vanadium, extra low interstitial, ELI) |
| Titanium Grade 24 | Titanium alloy (6% aluminum, 4% vanadium) plus 0.04% to 0.08% palladium |
| Titanium Grade 25 | Titanium alloy (6% aluminum, 4% vanadium) plus 0.3% to 0.8% nickel and 0.04% to 0.08% palladium |
| Titanium Grade 26 | Unalloyed titanium plus 0.08% to 0.14% ruthenium, standard oxygen, medium strength |
| Titanium Grade 27 | Unalloyed titanium plus 0.08% to 0.14% ruthenium, low oxygen,low strength |
| Titanium Grade 28 | Titanium alloy (3% aluminum, 2.5% vanadium) plus 0.08% to 0.14% ruthenium |
| Titanium Grade 29 | Titanium alloy (6% aluminum, 4% vanadium with extra low interstitial elements (ELI) plus 0.08% to 0.14% ruthenium |
| ASTM-F136-98e1 | Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNSR56401) for Surgical Implant Applications |
| ASTM-F67-00 | Unalloyed Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM-F1108-97a | Ti6AL4V Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM-F-620-00 | Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants |
| ASTM-F1472-99 | Wrought Titanium-6 Aluminum-4 Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM-F1341-99 | Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications |
| ASTM-F1295-97a | Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B265-99 | Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM-B299-99 | Titanium Sponge |
| ASTM-B338-99 | Seamless and Welded Titanium &Titanium Alloy Tubes for Condensers & Heat Exchangers |
| ASTM-B348-00 | Titanium and Titanium Alloy Bars and Billets |
| ASTM-B363-00 | Seamless and Welded Unalloyed Titanium & Titanium Alloy Welding Fittings |
| ASTM-B367-93 (1998) | Titanium and Titanium Alloy Castings |
| ASTM-B381-00 | Titanium and Titanium Alloy Forgings |
| ASTM-B600-91 (1997)e1 | Standard Guide for Descaling and Cleaning Titanium & Titanium Alloy Surfaces |
| ASTM-B861-00 | Titanium and Titanium Alloy Seamless Pipe |
| ASTM-B862-99 | Titanium and Titanium Alloy Welded Pipe |
| ASTM-B863-99a | Titanium and Titanium Alloy Wire |
| MIL-T-9046H | MIL-T-9046J AMENDMENT-2 (1991) | |
|---|---|---|
| Type I | Commercially Pure Titanium (CP) | |
| Code | Designation | |
| Comp A - Unalloyed | (40 KSI-YS) | |
| Comp B - Unalloyed | (70 KSI-YS) | |
| Comp C - Unalloyed | (55 KSI-YS) | |
| Type II | Alpha Titanium Alloy | |
| Code | Composition | |
| Comp A | 5AL-2.5Sn | |
| Comp B | 5AL-2.5Sn ELI | |
| Comp F | 8AL-1Mo-1V | |
| Comp G | 6AL-2CG-1Ta-0.8Mo | |
| Type III | Alpha-Beta Titanium Alloy | |
| Code | Composition | |
| Comp C | 6AL-4V | |
| Comp D | 6AL-4V ELI | |
| Comp E | 6AL-6V-2Sn | |
| Comp G | 6AL-2Sn-4Zr-2Mo | |
| Comp H | 6AL-4V SPL | |
| Type IV | Beta Titanium Alloys | |
| Code | Composition | |
| Comp A | 13V-11Cr-3AL | |
| Comp B | 11.5Mo-6Zr-4.5Sn | |
| Comp C | 3AL-8V-6Cr-4Mp 4Zr | |
| Comp D | 8Mo-8V-2Fe-3AL | |
| Commercially Pure Titanium (CP) | |
|---|---|
| Code | Designation |
| CP-3 | (40 KSI-YS) |
| CP-1 | (70 KSI-YS) |
| CP-2 | (55 KSI-YS) |
| CP-4 | (30 KSI-YS) |
| Alpha Titanium Alloys (A) | |
| Code | Composition |
| A-1 | 5AL-2.5Sn |
| A-2 | 5AL-2.5Sn (ELI) |
| A-3 | 6AL-2Cb-1Ta-0.8Mo |
| A-4 | 8AL-1Mo-1V |
| Alpha-Beta Titanium Alloy (AB) | |
| Code | Composition |
| AB-1 | 6AL-4V |
| AB-2 | 6AL-4V (ELI) |
| AB-3 | 6AL-6V-2Sn |
| AB-4 | 6AL-2Sn-4Zr-2Mo |
| AB-5 | 3AL-2.5V |
| AB-6 | 8Mn |
| Beta Titanium Alloys (B) | |
| Code | Composition |
| B-1 | 13V-11Cr-3AL |
| B-2 | 11.5Mo-6Zr-4.5Sn |
| B-3 | 3AL-8V-6Cr-4Mo-4Zr |
| B-4 | 8Mo-8V-2Fe-3AL |
| Brinell | Rockwell | Rockwell | Approximate Tensile | Brinell | Rockwell | Approximate Tensile |
|---|---|---|---|---|---|---|
| Hardness | B Scale | C Scale | Lbs. psi | Hardness | B Scale | lbs. psi. |
| 653 | - | 62 | 324,000 | 217 | 95 | 103,000 |
| 627 | - | 60 | 311,000 | 212 | 96 | 103,000 |
| 601 | - | 68 | 306,000 | 207 | 95 | 101,000 |
| 578 | - | 57 | 290,000 | 202 | 94 | 98,000 |
| 555 | - | 56 | 284,000 | 197 | 93 | 96,000 |
| 534 | - | 54 | 270,000 | 192 | 92 | 93,000 |
| 514 | - | 53 | 263,000 | 187 | 91 | 91,000 |
| 495 | - | 51 | 250,000 | 183 | 90 | 89,000 |
| 477 | - | 50 | 243,000 | 179 | 89 | 87,000 |
| 461 | - | 49 | 236,000 | 174 | 88 | 85,000 |
| 444 | - | 47 | 223,000 | 170 | 87 | 83,000 |
| 429 | - | 47 | 217,000 | 166 | 86 | 81,000 |
| 415 | - | 45 | 211,000 | 163 | 85 | 80,000 |
| 401 | - | 42 | 194,000 | 159 | 84 | 78,000 |
| 388 | - | 41 | 188,000 | 156 | 83 | 77,000 |
| 375 | - | 40 | 182,000 | 153 | 82 | 76,000 |
| 363 | - | 38 | 171,000 | 149 | 81 | 75,000 |
| 352 | - | 37 | 166,000 | 146 | 80 | 74,000 |
| 331 | - | 36 | 162,000 | 143 | 79 | 73,000 |
| 321 | - | 34 | 153,000 | 140 | 78 | 71,000 |
| 311 | - | 33 | 148,000 | 137 | 77 | 70,000 |
| 302 | - | 32 | 144,000 | 134 | 76 | 69,000 |
| 293 | - | 31 | 140,000 | 131 | 74 | 67,000 |
| 285 | - | 30 | 136,000 | 128 | 73 | 66,000 |
| 277 | - | 29 | 132,000 | 126 | 72 | 65,000 |
| 269 | - | 28 | 129,000 | 124 | 71 | 63,000 |
| 262 | - | 27 | 126,000 | 121 | 70 | 62,000 |
| 255 | - | 25 | 120,000 | 118 | 69 | 61,000 |
| 248 | - | 24 | 117,000 | 116 | 68 | 60,000 |
| 241 | 100 | 23 | 115,000 | 114 | 67 | 59,000 |
| 235 | 99 | 22 | 112,000 | 112 | 66 | 58,000 |
| 229 | 98 | 21 | 110,000 | 109 | 65 | 57,000 |
| 223 | 97 | 20 | 108,000 | 107 | 64 | 55,000 |
| Other Specification: | |
|---|---|
| MIL-H-81200 Rev. B(1991) | Heat Treatment of Titanium & Titanium alloys |
| MIL-T-81556A | Extruded Bars & Shapes, Titanium & Titanium alloys |
| MIL-I-8950 | Ultrasonic Inspections |
| AMS-STD 2154(1982) | Ultrasonic Inspections |
| AMS 2241 Rev. L(1996) | Tolerances, Titanium & Titanium alloy bars & wire |
| AMS 2242 Rev. E(1995) | Tolerances, Titanium sheet & plate |
| AMS 2244 Rev. B(1994) | Tolerances, Titanium tubing |
| AMS 2245 Rev. A(1994) | Tolerances, Titanium extruded bar |
| AMS 2249 Rev. D(1992) | Chemical Check Analysis Limits, Titanium & Titanium alloys |
| AMS 2631 Rev. B(1995) | Ultrasonic Inspections |
| AMS 2801 Rev. A(1994) | Tolerances, Titanium heat treatment specifications |
| AMS 2809(1994) | Identification Requirements |
| Atomic Number | 22 |
| Heat of Vaporization | 9.83MJ/kg |
| Atomic Weight | 47.9 |
| Machinability Rating | 40 |
| Atomic Volume | 10.6W/D |
| Magnetic Susceptibility | 1.25x10-6 / 3.17 emu/g |
| Boiling Point | 3260 °C/5900 °F |
| Melting Point | 1668°C + 10°C (3035°F + 18°F) |
| Coefficient of friction | 0.8 at 40 m/min (125 ft/min) / 0.68 at 300 m/min (1000 ft/min) |
| Modulus of Elasticity | 14.9 x 106psi |
| Coefficient of thermal expansion | 22 |
| Atomic Number | 8.64 x 10-6°C |
| Poisson's Ratio | 0.41 |
| Color | Dark Grey |
| Solidus/Liquidus | 1725°C/ (3137°F) |
| Covalent Radius | 1.32 A |
| Specific Gravity | 4.5 |
| Density | 4.51 gm/cm3 (0.163 lb/in3) |
| Specific Heat (at 25oC) | 0.518 J/kg °K, (0.124 BTU/lb °F) |
| Electrical Conductivity | 3% IACS (copper 100%) |
| Specific resistance | 554 µohm-cm |
| Electrical Resistivity | 47.8 µohm-cm |
| Tensile Strength | 35 ksi min |
| Electronegativity | 1.5 Pauling's |
| Thermo-Conductivity | 9.0 BTU/hr ft2°F |
| First Ionization Energy | 158 k-cal/g-mole |
| Thermal Neutron Absorption Cross Section | 5.6 barnes/atom |
| Hardness | HRB 70 to 74 |
| Young's Modulus of Elasticity | 116 x 106 lbf/in2, 102.7 GPA |
| Heat of Fusion | 440 kJ/kg (est.) |
| Melting point | 1670°C, 3038°F, 1943 K |
| Boiling point | 3287°C, 5949°F, 3560 K |
| Density (g cm−3) | 4.506 |
We are supplying Titanium Metal to our worldwide clients in more then 45 countries such as South Africa, USA, UK, Canada, Sri Lanka, Australia, Nz, China, Singapore, UAE, Malaysia, Philippines, Korea, France, Germany, Italy and Israel.
