Trapezoidal threaded rod are in big demand all over the world as they are easy to manufacture and also they have high strength. It is possible to roll up nickel alloys, heat treated alloys, aluminum, carbon steel and stainless steel, up to 40 feet long, in trap forms, with left handed thread angles or right handed thread angles. At Siddhagiri Metals, where metric trapezoidal thread are concerned or even for that matter other types of trapezoidal threaded products such as 8mm trapezoidal lead screw, we pursue an ISO metric profile. The pitch descriptions and the diameter of trapezoidal nut are in metric units.
Trapezoidal threads are used to produce a linear motion when they are rotated and this is almost always under the influence of a load that is heavy. Trapezoidal lead screw exhibit low efficiency, but because they are easy to manufacture, trapezoidal lead screw nut are considered to be highly cost effective. Trapezoidal rod are essential used to deal with large loads, such as in the lead screw of a lathe or in a vise. What separates trapezoidal threaded bar from the run of the mill 29° acme threaded bars is that these bars have an angle of 30°.
Trapezoidal threads of metric standard, inclusive of the likes of DIN 103 trapezoidal thread, are covered under DIN103. The uses of these trapezoidal thread are so very similar, that it is even possible to interchange these different threads, when the threads-per-inch (TPI) is similar of course, this is after taking into consideration the allowed manufacturing tolerances. A few common uses of trapezoidal tap and trapezoidal threads include the likes of valve stems, table lifts, trailer jacks, vises and clamps, jack-stands, medical diagnostic device drives and lead screws on CNC machinery for linear actuation.
There are standardized variations that are available of metric trapezoidal threaded rod and these include the likes of self-centering threads (these are the kind of threads that will not bind so easily when exposed to lateral forces), left-hand threads and multiple-start threads. Trapezoidal screw have the capabilities of coping with big loads and they also have high strength. We, Siddhagiri Metals, manufacture and stock a huge range of trapezoidal thread nut and these can be procured from us in sizes that start with a diameter of 10 mm.Whether you happen to be seeking trapezoidal threaded rod UK or if you are on the lookout for trapezoidal threaded rod Australia, no matter what your need, even though it may be trapezoidal lead screw UK, be sure to call us! We, Siddhagiri Metals, are leading trapezoidal tap suppliers and manufacturers and stockists of a huge range of trapezoidal threads, bars, rods and nuts and we offer you products of the highest international quality at the best price!
|Trapezoidal Options||Steel and stainless steel
Left and right-hand threads
Steel, bronze nuts
|British standards||BS EN ISO 3506|
|Stainless Steel Trapezoidal Threaded Rod Size||
Stainless Steel Trapezoidal Threaded Rod M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes
|Length||3 mm to 200 mm (Custom Length available)|
|Stainless Steel Bolts, Studs Threads:||METRIC, BSW, BSF, UNC, UNF or as required|
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards
|DIN Standard||B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985|
|UTS – Unified Thread Standard||UNC, UNF, UNEF, UNS, NPT, NPTF|
|Dimensions||ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.|
|ISO – International Organization for Standardization||ISO 4032, ISO 4033, ISO 4017, ISO7380 JIS standards|
|Tolerance||+/-0.01mm to +/-0.05mm|
|Head drive:||Phillips, Slotted, Phillips/Slot, Six-Lobe, etc|
|Finishing:||Zinc (yellow, white, blue, black), black oxide,
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
|Finish||Per ASTM A380/A380M|
Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing
|Origin and service-region:||European
Origin of Stainless Steel Trapezoidal Threaded Rod are Western European. However projects with eastern origin are possible on request.
|Stainless Steel bolting materials Surface Coating:||
All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.
|Top Manufacturers||SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.|
|Stainless Steel Trapezoidal Threaded Rod Packing:||IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request|
|Why choose us?||
|Delivery time||Regular product is about 7-15 days, custom product will according to special requirement|
|Payment Terms||T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping|
|Other available material||
|Stainless Steel Trapezoidal Threaded Rod dealers & distributors are located in||
Mumbai, Ahmedabad, Gujarat, Chennai, Ludhiana, Bangalore, India
|Uses & application||Wind tower, Nuclear power, Railway, Automotive industry, Construction, Electronic industry|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Right Hand Thread, 1 Metre Length||£96.64|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Left Hand Thread, 1 Metre Length||£135.32|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Right Hand Thread, 1 Metre Length||£102.39|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Left Hand Thread, 1 Metre Length||£143.37|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Right Hand Thread, 1 Metre Length||£127.27|
|Trapezoidal Rolled Leadscrew, 1 Start Steel Left Hand Thread, 1 Metre Length||£178.21|
Please note: Price is subject to change without any prior notice. This is just an approx price list in India.
You have come to the right place. These Trapezoidal Threaded Rod are highly resistant against any form of acidic, oxidization or contact with any material that leads to corrosion. Speak us at +91-22-2386 5529 / 6610 9206 for more detail.
|Trapezoidal Lead Screw||Trapezoidal Rod|
|Trapezoidal Tap Suppliers||Trapezoidal Thread Nut|
|Trapezoidal Lead Screw Uk||8mm Trapezoidal Lead Screw|
|Din 103 Trapezoidal Thread||Trapezoidal Threaded Rod Australia|
|Metric Trapezoidal Threaded Rod||A4 stainless steel Trapezoidal Threaded rod|
|Metric Trapezoidal Rod A2||Trapezoidal Thread Form|
|Trapezoidal Thread rod 304||Trapezoidal Thread Dimensions|
|Trapezoidal Thread Chart||Difference Between Acme And Trapezoidal Thread|
|Trapezoidal Threaded Rod||Trapezoidal Screw|
|Trapezoidal Nut||Trapezoidal Tap|
|Trapezoidal Threaded Rod Uk||Trapezoidal Lead Screw Nut|
|Trapezoidal Threaded Bar||Metric Trapezoidal Thread|
|Trapezoidal Thread||304 Stainless Steel Trapezoidal Tap|
Standard trapezoidal thread pitches for metric diameters
|Nominal diameter (mm)||Pitch (mm)|
|We have our dealers & distributors globally to fulfill all your requirement of Trapezoidal Threaded Rod|